PC fails to start due to dual-channel RAM issue
PC fails to start due to dual-channel RAM issue
You're facing compatibility issues with your ASUS Prime A320M-K setup. The system boots fine with one stick of RAM but not with the second, and the BIOS voltage adjustment didn't help. The motherboard's memory compatibility only lists a limit under 1DIMM, suggesting it might not support dual DIMMs. It seems you're likely dealing with a hardware limitation. Your best options are either upgrading to a motherboard that supports dual DIMMs or considering a replacement unit, as suggested by the image link.
You're using the same motherboard as your Corsair Vengeance and 16GB RAM at 3200MHz, which is great! To confirm the exact RAM model, could you share the specific type or brand you're using?
It might help to discharge the CMOS battery for a few minutes before attempting to fix the issue.
I owned an old 8GB drive that I sold, then purchased a pair of 2x 8GB drives. However, it never showed up when both were connected. Eventually, I used just one stick and it functioned, which is how I’ve been managing for the past month while looking for a solution.
Check each of the two sticks from the new set individually to ensure you didn’t purchase a kit with a faulty stick. Use the familiar, reliable stick in each of the two slots on the board to determine if the issue lies with one of the slots or channels.
Checked both sticks; they function properly in single channel. No more sticks to test. Someone on another forum suggested it might relate to my first-gen Ryzen 5 1600 CPU, but I’m not sure if that’s relevant.