PC fails to power on after assembly, no screen appears. Could be DDR5 RAM or motherboard incompatibility?
PC fails to power on after assembly, no screen appears. Could be DDR5 RAM or motherboard incompatibility?
So I bought some new pc parts and after assembly it starts but no power out or display. So I checked compatability between my new ram and the Motherboard Mb: TUF GAMING A620M-PLUS Ram : F5-6000J3036F16GX2-FX5 cpu : ryzen 5 7600x pcpartpickers and other compatability sites state no issue but official sites state there's no compatability. Also one of the ideas I had is some bios issue so I flashed the bios using a USB and didn't really help. Am I cooked?
I don’t have access to a full system specification list. Could you clarify which system you’re referring to? I’ll do my best to provide the details you need.
Run the device using a single stick. Verify BIOS updates after startup.
Ram- F5-6000J3036F16GX2-FX5 mb - asus tuf A620M-PLUS CPU- razer 7600x GPU- asus 4070super I believe these are the key components.
I completed the same steps previously, after several adjustments with formatting it worked, though it didn’t assist at all unfortunately.
Next logical step would be to pick up a different kit of ram and test, may take some troubleshooting and component swapping to figure it out if individual sticks in different slots, as well as a bios update didn't fix it. It'll be a process if even another kit doesn't work. Is the computer powering on like fans and lights? Just no display? Or does it have zero signs of life at all?