F5F Stay Refreshed Hardware Desktop PC fails to display updates after adding new RAM.

PC fails to display updates after adding new RAM.

PC fails to display updates after adding new RAM.

Pages (2): 1 2 Next
C
catseecoo
Senior Member
662
04-04-2021, 08:33 PM
#1
I have some issues with my new RAM setup. I purchased two 8GB modules, totaling four 8GB sticks, but there are posting problems. Whenever I attempt to post, it just stops and shows a black screen. Booting with one or two of the original sticks works fine, but the new ones don’t respond at all. I reset the CMOS, enabled XMP with the old sticks, and adjusted the voltage manually to 1.2V, yet nothing happens. The sticks themselves seem different—both are HyperX Fury 8GB models at 2666MHz, but I haven’t changed anything else. It’s confusing how they behave differently. Any advice or insights would be appreciated!
C
catseecoo
04-04-2021, 08:33 PM #1

I have some issues with my new RAM setup. I purchased two 8GB modules, totaling four 8GB sticks, but there are posting problems. Whenever I attempt to post, it just stops and shows a black screen. Booting with one or two of the original sticks works fine, but the new ones don’t respond at all. I reset the CMOS, enabled XMP with the old sticks, and adjusted the voltage manually to 1.2V, yet nothing happens. The sticks themselves seem different—both are HyperX Fury 8GB models at 2666MHz, but I haven’t changed anything else. It’s confusing how they behave differently. Any advice or insights would be appreciated!

F
funnymoney123
Junior Member
15
04-06-2021, 01:07 AM
#2
Test each RAM stick individually, one at a time, to determine if an issue lies with a specific stick. Disconnect all but one RAM module and power on the system. Continue this process for each RAM stick in every slot until you identify the faulty one.
F
funnymoney123
04-06-2021, 01:07 AM #2

Test each RAM stick individually, one at a time, to determine if an issue lies with a specific stick. Disconnect all but one RAM module and power on the system. Continue this process for each RAM stick in every slot until you identify the faulty one.

P
Pangaea_
Member
191
04-06-2021, 09:36 AM
#3
I checked every RAM stick in each port. The older ones work and boot in all slots. The newer ones don’t post in any of them.
P
Pangaea_
04-06-2021, 09:36 AM #3

I checked every RAM stick in each port. The older ones work and boot in all slots. The newer ones don’t post in any of them.

C
CoreNB2
Junior Member
20
04-24-2021, 11:34 PM
#4
It's clear the issue lies with the recent models. You need to verify if both the new and old versions have a model number.
C
CoreNB2
04-24-2021, 11:34 PM #4

It's clear the issue lies with the recent models. You need to verify if both the new and old versions have a model number.

S
Sussu
Senior Member
708
04-25-2021, 07:36 AM
#5
The newest version stands out compared to the previous one. The heatsinks appear altered.
S
Sussu
04-25-2021, 07:36 AM #5

The newest version stands out compared to the previous one. The heatsinks appear altered.

L
Little_Roxie
Junior Member
47
04-26-2021, 09:32 PM
#6
Check for any HyperX PDFs related to RAM or Kingston components. Verify if your motherboard can handle the requested RAM capacity.
L
Little_Roxie
04-26-2021, 09:32 PM #6

Check for any HyperX PDFs related to RAM or Kingston components. Verify if your motherboard can handle the requested RAM capacity.

B
Beder822
Member
80
04-28-2021, 04:46 PM
#7
I found several PDF files that aren’t loading properly. The main variation I noticed was the cas latency—15 for the older version and 16 for the newer ones. The motherboard can handle 4 slots with dual channel speeds up to 64 GB.
B
Beder822
04-28-2021, 04:46 PM #7

I found several PDF files that aren’t loading properly. The main variation I noticed was the cas latency—15 for the older version and 16 for the newer ones. The motherboard can handle 4 slots with dual channel speeds up to 64 GB.

P
Poppin
Member
99
04-29-2021, 12:46 AM
#8
The PC may fail to start completely or display a specific error during the boot process.
P
Poppin
04-29-2021, 12:46 AM #8

The PC may fail to start completely or display a specific error during the boot process.

B
bram_97
Junior Member
17
05-06-2021, 12:44 PM
#9
The display remains blank while the fan spins, the case shows an RGB color, but no action occurs.
B
bram_97
05-06-2021, 12:44 PM #9

The display remains blank while the fan spins, the case shows an RGB color, but no action occurs.

L
Luka3582
Junior Member
13
05-06-2021, 02:08 PM
#10
The monitor may not be sending a signal, causing the screen to appear black, or it could be functioning properly but displaying an unintended black image.
L
Luka3582
05-06-2021, 02:08 PM #10

The monitor may not be sending a signal, causing the screen to appear black, or it could be functioning properly but displaying an unintended black image.

Pages (2): 1 2 Next