PC experiences numerous startup issues.
PC experiences numerous startup issues.
Hi, I recently upgraded my FX-8320E system using refurbished components. The motherboard is an Intel DX79TO running BIOS version 0460, and the CPU is an i7-3960X. After swapping some parts, when I installed an SSD that already had Windows installed, the PC failed to boot. It worked on other systems with the same setup. I removed the two 4GB RAM modules and replaced them with a single 8GB RAM stick. After installing it in the first slot, I received a code 60 error. I moved it to the second slot, but instead of seeing the Non Bootable device warning, I saw the message: "The system BIOS has detected unsuccessful POST attempt (s). Possible causes include recent changes to BIOS Performance options or recent hardware changes." I was given options to enter BIOS Setup by pressing 'Y' or to cancel and try booting with previous settings. After pressing N, it displayed "PXE-E61: MEDIA TEST FAILURE, CHECK CABLE PXE:M0F: EXITING INTEL BOOT AGENT. NO BOOTABLE DEVICE - INSERT BOOT DISK AND PRESS ANY KEY". While attempting a Windows 10 installation via USB, the Windows logo flashed briefly and then I saw an orange and white screen. I looked up the issue mentioning Bitlocker, though I had never used it before. The error codes associated with the NO Bootable Device message were consistently E6 through E7. Thank you for reading.
If it's an MBR disk then the BIOS must support CSM and be enabled to read the boot sector.
If it's a GPT disk (most common) then the EFI executable that boots Windows and the fat32 partition it contains should be stored in the motherboard's NVRAM.
Some motherboards recognize an existing EFI partition and automatically add its files to the boot list, while others don't. I previously faced a similar problem where a particular board failed to detect my Linux installation, requiring a GRUB reinstall to resolve the issue, though Windows was detected correctly.
Welcome to the forums, newcomer!
I changed some components and when I put in my SSD with Windows already there, the PC wouldn’t boot properly. It worked on two other systems too.
After rebuilding your bootable USB installer for Windows 10, try reinstalling the OS. You should be good.
Install the OS offline and add all necessary drivers manually via an elevated command—right-click the installer then run as Administrator.
If you’re unsure, feel free to share your specs like this:
CPU:
CPU cooler:
Motherboard:
Ram:
SSD/HDD:
GPU:
PSU:
Chassis:
OS:
Monitor:
Please include the age of the PSU along with its make and model. Also, let me know your motherboard’s BIOS version at this time.
Since you upgraded your system, we should see two sets of information—one before and one after.
Hello, thank you for your inquiry. I'll attempt to compile as much information as possible for you:
Present Specifications:
Processor: Intel Core i7-3960X
Memory: Enermax Liqmax III 120
Motherboard: Intel DX79TO
RAM: Timetec 8GB DDR3 at 1600 MHz
Storage: Bilksem/Generic 120 GB SSD, HDD 1TB Seagate Constellation, HDD 2TB HGST Laptop Drive (model not specified)
GPU: EVGA GTX 1060 6GB with 1 fan
Power Supply: Zalman Z1 Neo
Operating System: Windows 11 Home x64
Display: Generic Dell Monitor (720p), sticker indicates manufacture date August 2013
Purchase Details: Acquired second-hand on Fb Marketplace; original components included, PSU likely present due to new parts.
Original Configuration: CPU was AMD FX-8320E, motherboard Gigabyte-970A-DS3P.
I've gathered all available details and apologize if I couldn't provide the complete information. Thank you for your patience.
Additionally, thank you for the friendly greeting and assistance with the issue. Also, please accept my apologies if I accidentally sent two specification sheets; my phone was running a bit slow.