PC doesnt stay overclocked
PC doesnt stay overclocked
i've had enough of this. before starting, i'm not very tech-savvy when it comes to pc parts and specs, so i built my first pc a year ago using the following components. after a few months of use, it started to perform poorly and realized it wasn't running as fast as it should have. i tried adding an XMP profile, which seemed to help, but then i noticed it wouldn't stay active. i had to restart the pc, go into bios, and change the settings to ddr4 3200 in order to play games smoothly every few days. i'm tired of this. why does it happen? if i don't fix this, my fps will jump wildly—averaging around 15 fps in fortnite—and then suddenly spike to 100+ fps when i restart. it's frustrating. would a full bios update solve this? please forgive any mistakes in grammar or english, i didn't want to waste too much time typing this.
Did someone else encounter similar challenges? It seems many are unsure about adjusting BIOS settings for Ryzen systems. Some suggest trying a 2933MHz setting, though it can be tricky with memory performance. One person shared their experience: they used a RAM rated for 3000MHz but managed to stabilize at 2933MHz without overclocking the CPU. Later, when attempting further optimization, they had to lower the memory clock again, ending up around 3.9GHz on the CPU and 2800MHz on the RAM.
Have you changed the BIOS to the newest release? RAM performance can be challenging with Ryzen, and many recommend trying a 2933MHz setting... Here’s what someone else faced:
Their RAM was rated for up to 3000MHz. When they initially set it to match that speed using XMP mode, they encountered the same problem without overclocking the CPU. Eventually, they stabilized it at 2933MHz. However, when they tried further tuning to push the frequency higher, the RAM would drop back down to a lower setting—often around 2800MHz or even 2666MHz depending on the situation.
Another person shared similar steps:
If you're using XMP profiles, that's the first step. But for Ryzen systems, it’s not uncommon to hit issues with RAM speeds above 2400MHz. You might need to test manually at 2666MHz or lower. If it doesn’t stay stable, your motherboard may not support the desired frequency, and it will revert to its default setting to ensure proper booting. Make sure you're using the latest BIOS for your card as well.
i’ve had enough of this. before i start, i’m not really tech-savvy when it comes to pc components and specs, so i built my first pc a year ago using these parts: https://pcpartpicker.com/list/ddWYjc. after a few months, it started acting poorly and couldn’t handle games properly. i added an XMP profile which seemed to help, but then realized it wouldn’t stay active. i had to restart the pc, go into bios, and switch to ddr4 3200 to play games smoothly every few days. i’m tired of this. why does it fail so badly? if i don’t fix it, fps will jump wildly—averaging around 15 fps in fortnite—and then suddenly spike to 100+ on high settings. i’m not sure what’s wrong. would a full bios update solve this? please forgive any mistakes in grammar or english, i just wanted to avoid spending too much time typing.