F5F Stay Refreshed Hardware Desktop PC does not POST ?

PC does not POST ?

PC does not POST ?

L
laugh0305
Junior Member
40
02-08-2020, 11:44 PM
#1
Hello, I'm currently facing some PC problems and need to figure out the main issue. I'm uncertain whether the problem lies with the CPU or RAM, but my PC isn't turning on, USB ports aren't working, and the keyboard LEDs aren't lighting up. I've tried various solutions without success. My CPU debug light is active, so fans spin and LEDs illuminate when I power it on. This situation began when my pre-built PC would randomly fail to turn on one day. I researched and replaced my APEvia 650W PSU with a Corsair CX750M PSU. Now it powers on but doesn't boot. I also swapped my Pro B550M Wi-Fi card for a new one, but after bending pins and damaging the CMOS battery socket to retrieve the battery, nothing has changed. All components are properly seated and plugged in correctly. Obviously, there could be many reasons why it isn't posting, so I've tried updating the BIOS after installing the new motherboard to check compatibility with my CPU. I've spent a lot of time on this topic and would like to summarize my specs here. If anyone has any advice or can assist, please let me know, thank you.
L
laugh0305
02-08-2020, 11:44 PM #1

Hello, I'm currently facing some PC problems and need to figure out the main issue. I'm uncertain whether the problem lies with the CPU or RAM, but my PC isn't turning on, USB ports aren't working, and the keyboard LEDs aren't lighting up. I've tried various solutions without success. My CPU debug light is active, so fans spin and LEDs illuminate when I power it on. This situation began when my pre-built PC would randomly fail to turn on one day. I researched and replaced my APEvia 650W PSU with a Corsair CX750M PSU. Now it powers on but doesn't boot. I also swapped my Pro B550M Wi-Fi card for a new one, but after bending pins and damaging the CMOS battery socket to retrieve the battery, nothing has changed. All components are properly seated and plugged in correctly. Obviously, there could be many reasons why it isn't posting, so I've tried updating the BIOS after installing the new motherboard to check compatibility with my CPU. I've spent a lot of time on this topic and would like to summarize my specs here. If anyone has any advice or can assist, please let me know, thank you.

O
Osman_PvP_07
Member
54
02-10-2020, 03:10 AM
#2
do you need the complete system specifications? what caused the debug light to activate?
O
Osman_PvP_07
02-10-2020, 03:10 AM #2

do you need the complete system specifications? what caused the debug light to activate?

C
Capuzzi
Member
197
02-17-2020, 11:39 PM
#3
Hello, thank you for your response. I have an Intel Core i5-5300i3 processor, a GTX 1060 graphics card, a Pro B550M motherboard with WiFi, two 8GB RAM sticks, and my CPU debug light is active. I also have a 1TB SSD.
C
Capuzzi
02-17-2020, 11:39 PM #3

Hello, thank you for your response. I have an Intel Core i5-5300i3 processor, a GTX 1060 graphics card, a Pro B550M motherboard with WiFi, two 8GB RAM sticks, and my CPU debug light is active. I also have a 1TB SSD.

S
super_saiyan20
Junior Member
21
02-24-2020, 07:43 PM
#4
Moving this to System forum.
S
super_saiyan20
02-24-2020, 07:43 PM #4

Moving this to System forum.

S
Sussu
Senior Member
708
02-24-2020, 08:33 PM
#5
Thank you for your message. I wasn't sure which option to choose.
S
Sussu
02-24-2020, 08:33 PM #5

Thank you for your message. I wasn't sure which option to choose.