PC crashing

Papyrule
Senior Member

560

07-25-2016, 06:38 PM

My computer has been unstable over the last few days, beginning with occasional crashes but progressing to persistent blue screens. Now it barely starts up and only briefly reaches the login screen before crashing again. I've attempted various troubleshooting steps and managed to boot into Windows Safe Mode. It's unclear whether the problem stems from hardware or software since it appears to run in Safe Mode. The error codes I've gathered so far include: Unexpected kernel mode trap error, Page fault in non paged area, Kmode exception not handled, and Iqrl not less or equal.

Papyrule

07-25-2016, 06:38 PM #1

Ciera7
Member

225

08-01-2016, 05:22 AM

It operates smoothly in safe mode without a blue screen. The system has been functioning for an unknown duration. Hardware components include: CPU, RAM, storage device, graphics card, and network interface.

Ciera7

08-01-2016, 05:22 AM #2

Sophcutegirl
Junior Member

08-01-2016, 12:06 PM

It operated in safe mode for two hours before shutting down. I assembled it over a year ago and it functioned well, mostly without blue screen issues. Components: Gigabyte GTX 1600 OC, AMD Ryzen 7 3700 X, Gskill TridentZ 16 GB MSI b550, Pro WD Blue SN550 NVMe SSD, Corsair tx650m.

Sophcutegirl

08-01-2016, 12:06 PM #3

MrEpic_
Member

08-01-2016, 07:50 PM

Try reinstalling the RAM and check for stability. If issues persist, attempt using just one RAM stick installed to determine if that resolves the problem.

MrEpic_

08-01-2016, 07:50 PM #4

Try reinstalling the RAM and check for stability. If issues persist, attempt using just one RAM stick installed to determine if that resolves the problem.

GumiBears
Senior Member

256

08-07-2016, 01:53 AM

Also disable docp if it's active and observe the effect. This is recognized as a source of instability. If this resolves the problem, consider entering xmp timings and voltage directly. Occasionally this approach works.

GumiBears

08-07-2016, 01:53 AM #5

WAYcrafter
Junior Member

08-22-2016, 10:22 PM

When the device displays a blue screen, it’s possible to retrieve the stop code to identify the problem.

WAYcrafter

08-22-2016, 10:22 PM #6

When the device displays a blue screen, it’s possible to retrieve the stop code to identify the problem.

Provection
Junior Member

08-26-2016, 04:09 PM

Enter safe mode with networking and save the dump files as specified in the BSOD posting thread.

Provection

08-26-2016, 04:09 PM #7

Enter safe mode with networking and save the dump files as specified in the BSOD posting thread.

RageGlitch
Posting Freak

771

08-26-2016, 08:13 PM

The system is now functioning properly after the swap. It’s unclear exactly what caused the reset, but I’m relieved it’s working now. Appreciate your assistance!

RageGlitch

08-26-2016, 08:13 PM #8

The system is now functioning properly after the swap. It’s unclear exactly what caused the reset, but I’m relieved it’s working now. Appreciate your assistance!