F5F Stay Refreshed Hardware Desktop PC Crashing

PC Crashing

PC Crashing

Pages (2): 1 2 Next
M
MegaDJ
Member
64
04-06-2023, 04:35 AM
#1
I've owned a computer for a few years now, and it began having problems. About three months ago, it started acting sluggish, especially when using my mouse at 1000Hz during games. It would either freeze or crash completely. I thought the slowdown came from the mouse's polling rate, but after replacing the power supply, the issue worsened—my PC kept crashing and eventually triggered a BSOD. I resolved the power problem by swapping the PSU, but it led to more crashes. Eventually, I had to reset the boot drive, which was nice since only a few games were installed.

Later, I noticed frequent crashes before resetting. One of my RAM modules failed, but after replacing it, everything worked fine except for certain games that still displayed black screens or froze mostly. I have some older components, but the machine performed well before the PSU change.

I'm seeking advice on whether to fix this or if I need to replace parts. Option one seems appealing, though I haven't shared all the details here—it's a lot. My PSU is 750W.
M
MegaDJ
04-06-2023, 04:35 AM #1

I've owned a computer for a few years now, and it began having problems. About three months ago, it started acting sluggish, especially when using my mouse at 1000Hz during games. It would either freeze or crash completely. I thought the slowdown came from the mouse's polling rate, but after replacing the power supply, the issue worsened—my PC kept crashing and eventually triggered a BSOD. I resolved the power problem by swapping the PSU, but it led to more crashes. Eventually, I had to reset the boot drive, which was nice since only a few games were installed.

Later, I noticed frequent crashes before resetting. One of my RAM modules failed, but after replacing it, everything worked fine except for certain games that still displayed black screens or froze mostly. I have some older components, but the machine performed well before the PSU change.

I'm seeking advice on whether to fix this or if I need to replace parts. Option one seems appealing, though I haven't shared all the details here—it's a lot. My PSU is 750W.

P
peterphph
Member
175
04-07-2023, 12:47 PM
#2
Many factors could be at play here. It might be that the RAM is malfunctioning, or if you recently added more RAM, it may not work properly with your board.
P
peterphph
04-07-2023, 12:47 PM #2

Many factors could be at play here. It might be that the RAM is malfunctioning, or if you recently added more RAM, it may not work properly with your board.

M
maddy0598
Junior Member
22
04-07-2023, 05:57 PM
#3
Download the newest BIOS from the provided link and install the latest chipset drivers for AMD. Run PassMark Memtest86 to assess your memory, using the free version. Verify your system using sfc /scannow via command prompt or PowerShell with admin privileges.
M
maddy0598
04-07-2023, 05:57 PM #3

Download the newest BIOS from the provided link and install the latest chipset drivers for AMD. Run PassMark Memtest86 to assess your memory, using the free version. Verify your system using sfc /scannow via command prompt or PowerShell with admin privileges.

J
JuliBr0
Senior Member
495
04-18-2023, 08:09 AM
#4
I verified the RAM compatibility, ran both SFC/scannow and DISM/Online/RestoreHealth commands, and completed the latest driver downloads. I’ll update you shortly on whether the issue is resolved.
J
JuliBr0
04-18-2023, 08:09 AM #4

I verified the RAM compatibility, ran both SFC/scannow and DISM/Online/RestoreHealth commands, and completed the latest driver downloads. I’ll update you shortly on whether the issue is resolved.

G
GC_Lewk
Member
219
04-24-2023, 06:31 AM
#5
Focusing on memory consistency, no issues with RAM failure.
G
GC_Lewk
04-24-2023, 06:31 AM #5

Focusing on memory consistency, no issues with RAM failure.

L
Lucadagreat
Member
236
04-24-2023, 02:31 PM
#6
Yes, it continues to crash.
L
Lucadagreat
04-24-2023, 02:31 PM #6

Yes, it continues to crash.

K
kungfutyla
Posting Freak
780
05-01-2023, 11:43 AM
#7
Which specific PSU model do you have? Are you running the suggested GPU drivers version 22.6.1 Legacy? https://www.amd.com/en/support/graphics/...eon-r9-390 Have you swapped out the problematic mouse? What does CPU-Z display regarding your motherboard and BIOS version? Are you connecting one 8-pin (or 6+2 pin) and a 6-pin cable from the same PSU (piggy tail), or are you using two separate cables?
K
kungfutyla
05-01-2023, 11:43 AM #7

Which specific PSU model do you have? Are you running the suggested GPU drivers version 22.6.1 Legacy? https://www.amd.com/en/support/graphics/...eon-r9-390 Have you swapped out the problematic mouse? What does CPU-Z display regarding your motherboard and BIOS version? Are you connecting one 8-pin (or 6+2 pin) and a 6-pin cable from the same PSU (piggy tail), or are you using two separate cables?

J
Jallmi
Junior Member
4
05-03-2023, 11:55 AM
#8
I own an EVAG 750W Platnium, and all drivers are current with their releases. The mouse wasn't the problem; it was the insufficient power.
J
Jallmi
05-03-2023, 11:55 AM #8

I own an EVAG 750W Platnium, and all drivers are current with their releases. The mouse wasn't the problem; it was the insufficient power.

A
AtomDev
Junior Member
16
05-03-2023, 02:30 PM
#9
It has a mix of 1x6-pin and 6+2-pin connectors, includes a pigtail cable, but works well for most games except some specific ones.
A
AtomDev
05-03-2023, 02:30 PM #9

It has a mix of 1x6-pin and 6+2-pin connectors, includes a pigtail cable, but works well for most games except some specific ones.

N
nhak
Junior Member
7
05-11-2023, 08:59 AM
#10
Sure, I'm here to help! Just let me know if you need any clarification or have more questions. Also, no need to worry about old cables—just confirm what you're using.
N
nhak
05-11-2023, 08:59 AM #10

Sure, I'm here to help! Just let me know if you need any clarification or have more questions. Also, no need to worry about old cables—just confirm what you're using.

Pages (2): 1 2 Next