Pc beeps

ash_n_brad
Posting Freak

778

01-04-2022, 03:16 PM

I attempted to overclock and found the CPU mult at 3.9, BCLK at 105 MHz, resulting in a clock speed around 4.2 GHz and RAM at 1722 MHz. The RAM is stock, and I usually run it at 1866 MHz. I heard online that timing issues with memory might be the cause. Should I just reset the CMOS by removing the battery?

ash_n_brad

01-04-2022, 03:16 PM #1

FurryBACCA
Member

205

01-04-2022, 03:46 PM

Reset the CMOS. The unstable overlay appears to be an issue. Updated July 17, 2020 by TofuHaroto

FurryBACCA

01-04-2022, 03:46 PM #2

Reset the CMOS. The unstable overlay appears to be an issue. Updated July 17, 2020 by TofuHaroto

MrBiscuts
Junior Member

01-04-2022, 04:32 PM

Yes, you can easily remove the battery.

MrBiscuts

01-04-2022, 04:32 PM #3

Yes, you can easily remove the battery.

bbowman07
Member

01-04-2022, 06:32 PM

Ensure your board has a jumper connected. If not, remove the battery after disconnecting all external components such as the keyboard. Allow the device to sit for about five minutes.

bbowman07

01-04-2022, 06:32 PM #4

Ensure your board has a jumper connected. If not, remove the battery after disconnecting all external components such as the keyboard. Allow the device to sit for about five minutes.

StephanKruger
Member

226

01-24-2022, 09:16 PM

Yes, putting the battery back in should restore it to factory settings and normal operation.

StephanKruger

01-24-2022, 09:16 PM #5

Yes, putting the battery back in should restore it to factory settings and normal operation.

fishy37
Member

131

01-25-2022, 12:33 PM

In theory, yes.

fishy37

01-25-2022, 12:33 PM #6

In theory, yes.

jonathan__98
Member

111

01-25-2022, 05:32 PM

Thabks friend just switched it on and it's working.

jonathan__98

01-25-2022, 05:32 PM #7

Thabks friend just switched it on and it's working.