Payed for 50mbps, speed test shows 30mbps
Payed for 50mbps, speed test shows 30mbps
This situation is common among most ISPs in Ireland as well. My parents are using an 80mb/s DSL connection, yet they only receive around 40mb/s at 6 pm in the evening. They only reach their full speeds during morning hours or late at night when traffic is lighter.
DSL offers several options. 1) Your connection to the cabinet is lengthy, so you're only getting about 35Mbit, which translates to roughly 30Mbit actual speeds. 2) Competition means you can reach 50Mbit, but other users are overloading the line or your ISP, causing delays. 3) Your ISP's performance is poor for single-thread speeds or if local speedtest.net data isn't accurate. In these cases, using sites like dslreports.com/speedtest may show faster results since they test more connections. Option 1 is usually out of your control—it's a design constraint. Option 2 often improves during quieter times. Option 3 might not be an issue at all, as speedtest.net sometimes lacks reliable real-world data. I'd consider downloading files like Steam to check actual performance.
The issue stems from compatibility problems between the router, cables, and system limits.
They provide options at 5, 10, and 25 Mbps. For accurate speed checks, use just one device with a direct wired link.
What kind of cables are we talking about? Ethernet only covers speeds of 10,100, 1,000 or 10,000 Mbps. Regarding the connection to your home, how did you decide on this? If you're using DSL, then it's likely your line can only handle up to 30Mbit, which is often limited by the distance to the telephone network. However, if it's a cable connection, that's much less common. Usually, the limitation comes from your modem and the local equipment, but ordering a 50Mbit connection would suggest your cabinet supports it.
You were charged for speeds up to 50Mbps. A rate of 30 Mbps falls within the expected range, particularly during peak usage times when throttling occurs. If this pattern continues consistently throughout the day, reach out to your ISP immediately and inform them about the situation.
I suspect someone misrepresented you. Share a photo of your modem for better assistance. Ethernet speeds are usually in steps of 10, 100, 1000, or 10000 Mbps. If you’re seeing 30 Mbps, you’re not limited by your cable. I searched for information about Internet OTEnet S.A., but the only details available were “broadband” on Wikipedia. That might refer to cable, but not always. If you rely on coaxial service, there’s no fixed speed cap—it’s a radio signal with an antenna. Speed depends on modulation type. Using a poor cable like RG59 can cause instability and drops, as it struggles with higher frequencies. You’d likely need something like RG6 for better performance. The idea that an outdated modem is the main cause of slow speeds is accurate; DOCSYS 2.0 supports fewer channels and no channel bonding compared to 3.0, making it slower. Tell us what modem you have and we can help further.