F5F Stay Refreshed Hardware Desktop Overheating at 8700K?

Overheating at 8700K?

Overheating at 8700K?

Pages (3): Previous 1 2 3 Next
S
superQ71
Member
65
01-15-2018, 10:54 AM
#11
You're observing a CPU temperature of 22°C with an ambient of 22°C, which seems unusual. It suggests something isn't quite right. Most CPUs don't drop that low under normal conditions. If you're seeing such low readings, it could mean the cooling system isn't performing well—perhaps due to a poor cooler, dirty thermal paste, or other issues. For reference, a 95W processor typically draws more power and generates more heat. The numbers you mention highlight inefficiencies that aren't typical for standard setups. Check your cooling components and ensure they're functioning properly.
S
superQ71
01-15-2018, 10:54 AM #11

You're observing a CPU temperature of 22°C with an ambient of 22°C, which seems unusual. It suggests something isn't quite right. Most CPUs don't drop that low under normal conditions. If you're seeing such low readings, it could mean the cooling system isn't performing well—perhaps due to a poor cooler, dirty thermal paste, or other issues. For reference, a 95W processor typically draws more power and generates more heat. The numbers you mention highlight inefficiencies that aren't typical for standard setups. Check your cooling components and ensure they're functioning properly.

P
PieTheGuyTM
Member
152
01-16-2018, 05:03 PM
#12
Ugh, those temperatures are terrible! Is it still warm outside?
P
PieTheGuyTM
01-16-2018, 05:03 PM #12

Ugh, those temperatures are terrible! Is it still warm outside?

S
soldierman45
Member
152
01-16-2018, 06:34 PM
#13
I run my system with a 240mm DeepCool Maelstrom cooler. I haven't taken it off since installation, and it's been more than two years. It seems everything is working fine—no problems found with CrystalDiskInfo, and the thermal performance looks solid. Time to consider replacing the thermal paste.
S
soldierman45
01-16-2018, 06:34 PM #13

I run my system with a 240mm DeepCool Maelstrom cooler. I haven't taken it off since installation, and it's been more than two years. It seems everything is working fine—no problems found with CrystalDiskInfo, and the thermal performance looks solid. Time to consider replacing the thermal paste.

B
BlurryFqce
Senior Member
486
01-24-2018, 05:17 AM
#14
The system runs at its standard performance settings. The only customization is the 240mm radiator equipped with two fans for both CPU cooling and airflow management. There are also two additional 120mm case fans, and the motherboard is an NZXT H710.
B
BlurryFqce
01-24-2018, 05:17 AM #14

The system runs at its standard performance settings. The only customization is the 240mm radiator equipped with two fans for both CPU cooling and airflow management. There are also two additional 120mm case fans, and the motherboard is an NZXT H710.

F
Flare_Chick
Member
182
01-24-2018, 04:40 PM
#15
XTU's readings exceed those in HWM significantly. The device maintains a steady 66°C during idle, even after a cold start with no applications active.
F
Flare_Chick
01-24-2018, 04:40 PM #15

XTU's readings exceed those in HWM significantly. The device maintains a steady 66°C during idle, even after a cold start with no applications active.

A
Asiqduah
Junior Member
4
01-24-2018, 08:58 PM
#16
Completed every single XTU stress test successfully. Results showed consistent performance across all metrics. The average temperatures stayed around 77°C during testing. It’s been over two years since I installed this system, and I haven’t removed the CPU cooler—perhaps it’s time to consider a fresh thermal paste.
A
Asiqduah
01-24-2018, 08:58 PM #16

Completed every single XTU stress test successfully. Results showed consistent performance across all metrics. The average temperatures stayed around 77°C during testing. It’s been over two years since I installed this system, and I haven’t removed the CPU cooler—perhaps it’s time to consider a fresh thermal paste.

G
GotNoName
Junior Member
2
01-27-2018, 02:24 PM
#17
You can let it handle temperatures in the high 80s to low 90s, and it should be okay. Both of my Intel CPUs restarted around 107°C. Even my 3600XT ran a bit hot at 103°C—that was a mistake.
G
GotNoName
01-27-2018, 02:24 PM #17

You can let it handle temperatures in the high 80s to low 90s, and it should be okay. Both of my Intel CPUs restarted around 107°C. Even my 3600XT ran a bit hot at 103°C—that was a mistake.

C
craftmaker2002
Junior Member
6
01-28-2018, 06:49 PM
#18
It's good to hear. These increased temperatures might still influence performance. I'm trying to understand why Photoshop slows down despite only having two 30mb files. Adobe didn't provide any assistance. I've been working through every possible troubleshooting method for nearly two weeks, even tried a complete Windows reset to check if it would help, but it didn't. Photoshop is the only app that behaves this way, and the problem began suddenly. I haven't installed any updates before this issue started, so it seems to be a real puzzle.
C
craftmaker2002
01-28-2018, 06:49 PM #18

It's good to hear. These increased temperatures might still influence performance. I'm trying to understand why Photoshop slows down despite only having two 30mb files. Adobe didn't provide any assistance. I've been working through every possible troubleshooting method for nearly two weeks, even tried a complete Windows reset to check if it would help, but it didn't. Photoshop is the only app that behaves this way, and the problem began suddenly. I haven't installed any updates before this issue started, so it seems to be a real puzzle.

T
Thenatel972
Member
167
01-28-2018, 11:12 PM
#19
Northern West Coast baby is looking great this morning. The forecast calls for 6*C / 43*F with some sun and a few clouds. Expected highs around 9*C / 48*F and lows near 6*C / 43*F today. This feels like typical March weather—sunny, no wind, midday temps likely around 12*C / 54*F. Since I left the heater off after work, ambient temps should be about 18*C to 20*C / 64*F or roughly 68°F. At 66*C idling with a 240mm AIO, it’s definitely warm. If you’re at 66*C, expect 75*C+ load. Checking the case airflow by removing the side panel on the H710 could help—if temps drop noticeably, that might point to airflow issues. For maintenance, keep an eye on dust buildup on fan blades and radiator fins.
T
Thenatel972
01-28-2018, 11:12 PM #19

Northern West Coast baby is looking great this morning. The forecast calls for 6*C / 43*F with some sun and a few clouds. Expected highs around 9*C / 48*F and lows near 6*C / 43*F today. This feels like typical March weather—sunny, no wind, midday temps likely around 12*C / 54*F. Since I left the heater off after work, ambient temps should be about 18*C to 20*C / 64*F or roughly 68°F. At 66*C idling with a 240mm AIO, it’s definitely warm. If you’re at 66*C, expect 75*C+ load. Checking the case airflow by removing the side panel on the H710 could help—if temps drop noticeably, that might point to airflow issues. For maintenance, keep an eye on dust buildup on fan blades and radiator fins.

A
Aerithix
Member
182
01-29-2018, 05:15 AM
#20
I don't have a 8700K, just 3770K and X5690. The lows 80s is fine, I would try to stay out of the 90s, but if you are stress testing its fine. The CPU will let you know when it isn't happy, it always does. I just noticed you are not overclocked in anyway.. interesting. I would look closer at your CPU cooler, going on 2 years now.. she's getting some grey hair now..
A
Aerithix
01-29-2018, 05:15 AM #20

I don't have a 8700K, just 3770K and X5690. The lows 80s is fine, I would try to stay out of the 90s, but if you are stress testing its fine. The CPU will let you know when it isn't happy, it always does. I just noticed you are not overclocked in anyway.. interesting. I would look closer at your CPU cooler, going on 2 years now.. she's getting some grey hair now..

Pages (3): Previous 1 2 3 Next