Overclocking still causes the blue screen to appear.
Overclocking still causes the blue screen to appear.
Configure the LLC converter to a medium setting and adjust the VCore to 1.35V. This should provide a stable voltage, with VDroop maintaining around 1.29V during load for better consistency.
I also rely on that, but what measurement am I interpreting? I notice numerous voltage readings.
Read about gigabyte boards, it seems to be a topic of discussion. The idea of using an LLC medium is often recommended. Your questions about voltage limits are important—generally, staying under 1.3V during load is considered safe.
I'll have to check on my board, I could've sworn it was VCore but I might be wrong. I found a couple of reports about that board when I first made that post saying how voltage regulation improvements with more VDroop than what is given at medium is very minimal. I'll double check to see if I can find where I found those posts.
Sure, I'll be sure to get back to you. Thank you for your kind words!
It seems you're referring to the V-Core reading and the vrout. Could you clarify what you mean by "Pretty sure it’s vrout"?