Overclocking Ryzen 5 1600 from stock to 3.5 ?
Overclocking Ryzen 5 1600 from stock to 3.5 ?
Tried a few youtuber's tips beginning at 3.9G and 1.4V, guess what, no post! Auto works better and keeps reporting...
I wouldn't go that high. Based on what I've seen, anything above 1.45 can be risky for your CPU. Some comments mentioned you might only get about three years from a CPU running at 1.5-1.55 volts. You could try going down to 3.8 or 3.85ghz to check if it stays stable at 1.45 volts or lower. It seems safe to stick with 50 or 100mhz without risking damage.
AMD has repeatedly mentioned that 1.45v for a daily clock is acceptable, but only if proper cooling is in place. Before considering anything else, no—your air cooler isn't enough. I stick to 1.4v for daily use; it gives me 4.1 at that speed, so I'm not complaining. = )
Thought CPU presents the main challenge, which turns out to be the RAM. The Ryzen 5 appears particularly difficult to optimize for 3200 MHz. Recommendation: Begin with auto settings but adjust the GHz to your preference, then make gradual manual changes. For RAM: apply XMP profiles 1 and 2, and tweak further as needed... Feel free to ask if you need help with the optimization process.
I upgraded my Ryzen 5 1600 to 4.05GHZ 1.4v using the original cooler:
https://valid.x86.fr/edv1cp
It seems you're referring to a common challenge many people face in reaching 4.0.
I upgraded my Ryzen 5 1600 to 4.05GHZ 1.4v using the built-in cooler: https://valid.x86.fr/edv1cp
That’s quite a jump for continuous operation at that voltage! What temperatures are you reaching with Prime95 at that setting? I’d anticipate very high readings. Running Prime on lightweight FFTs would be wise. If you exceed 80°C, it’s best to lower the speed.
Having such a high overclock with high voltage is impressive, but if the heat isn’t managed well, it won’t be ideal.
If you manage to hit around 3.9GHz at 1.35V, that would be much better for your CPU. The extra 105MHz gain wouldn’t matter much beyond a slight improvement in Cinebench or similar tests. It won’t significantly impact gaming performance.
I’d reduce the speed to a more sensible setting and choose a stable voltage for long-term use.
Roland Of Gilead:
I upgraded my Ryzen 5 1600 to 4.05GHZ 1.4v using the built-in cooler: https://valid.x86.fr/edv1cp
That’s quite a jump for continuous operation at that voltage! What temperatures are you seeing with Prime95? I’d anticipate very high readings. I recommend running Prime on smaller FFTs. If you surpass 80°C, it’s best to lower the speed.
Having such a high overclock with high voltage is impressive, but if the heat isn’t properly managed, it won’t be ideal.
If you manage to hit around 3.9GHz at 1.35V, that would be much better for your CPU. The extra 105MHz won’t help much beyond a slight improvement in Cinebench or similar tests. It won’t significantly affect gaming performance.
I’d reduce the speed to a more reasonable setting and stick with a stable voltage for long-term use.
Thanks for the guidance, but I can definitely push it higher to 4.1 or even 4.2—but I didn’t try it before because I’m using the stock cooler. Also, I usually keep the CPU at 3.6 and 1.1250V, which works perfectly. It never goes above 61°C after a three-hour stress test with Prime95, and I can run it at full speed (3.4GHz) with only 1.05V stable—remarkable, as it stays under 56°C.
I’ll probably aim for 4GHz once I get a better cooler; it’s stable at around 1.375V.
Ryzen mentioned the safe operating voltage should be between 1.2 and 1.4V for continuous use.
Roland Of Gilead:
I upgraded my Ryzen 5 1600 to 4.05GHZ at 1.4v using the built-in cooler: https://valid.x86.fr/edv1cp. That’s quite a jump for continuous operation! What temperatures are you seeing with Prime95 at that setting? I’d anticipate very high readings. Running Prime95 on smaller FFTs would be wise. If it goes over 80°C, it’s time to lower the voltage.
Having such a high overclock with high voltage is impressive, but if the heat isn’t being managed well, it won’t be ideal. Achieving around 3.9GHz at 1.35V would be much better for the CPU. The extra 105MHz won’t help much beyond a slight improvement in Cinebench or similar tests. It won’t make a difference in gaming performance.
I’d reduce the speed to a more reasonable setting and keep the voltage moderate for long-term stability.
Thanks for the guidance, but I can push it even higher—possibly 4.1 or 4.2—but I didn’t try it before because I’m using the stock cooler. However, I usually run at 3.6GHz and 1.1250V, which works perfectly without exceeding 61°C after a three-hour stress test with Prime95. I can also run at stock speed (3.4GHz) at 1.05V, stable and impressive.
With a better cooler, I expect to reach around 4GHz and stay under 56°C. Ryzen recommended safe voltages between 1.2 and 1.4V for continuous use.