F5F Stay Refreshed Hardware Desktop Overclocking Ryzen 3 2200G! Need help?

Overclocking Ryzen 3 2200G! Need help?

Overclocking Ryzen 3 2200G! Need help?

Pages (3): 1 2 3 Next
S
Spidercyber
Senior Member
673
05-25-2021, 07:51 AM
#1
You're experiencing challenges with your Gigabtye B450M Aorus motherboard during overclocking. Your current settings seem stable at 3.9 GHz CPU and 1600MHz iGPU. The main hurdle is adjusting the voltage values in BIOS, especially with the latest F50 release. You've noticed discrepancies between the reported voltages and your desired settings—higher readings when auto mode is enabled versus lower when manual input is used. Stress testing your GPU has caused some instability, suggesting the voltage configuration might be sensitive. Consider fine-tuning the dynamic Vcore SOC settings and double-checking the BIOS version compatibility. If needed, consult the official documentation for the latest F50 BIOS specifics on voltage offset handling.
S
Spidercyber
05-25-2021, 07:51 AM #1

You're experiencing challenges with your Gigabtye B450M Aorus motherboard during overclocking. Your current settings seem stable at 3.9 GHz CPU and 1600MHz iGPU. The main hurdle is adjusting the voltage values in BIOS, especially with the latest F50 release. You've noticed discrepancies between the reported voltages and your desired settings—higher readings when auto mode is enabled versus lower when manual input is used. Stress testing your GPU has caused some instability, suggesting the voltage configuration might be sensitive. Consider fine-tuning the dynamic Vcore SOC settings and double-checking the BIOS version compatibility. If needed, consult the official documentation for the latest F50 BIOS specifics on voltage offset handling.

J
JokerFame
Senior Member
670
05-26-2021, 09:53 PM
#2
Adjust the SOC to 1.1 because the APU shares the same bus as the IMC; changing the SOC might help stability.
J
JokerFame
05-26-2021, 09:53 PM #2

Adjust the SOC to 1.1 because the APU shares the same bus as the IMC; changing the SOC might help stability.

D
DonMcOne
Member
188
05-27-2021, 05:16 AM
#3
I increased the iGPU overclock by adjusting the SOC to 1.2. It worked well on Ryzen master, though I’m limited to offset settings here. 1.416V seems quite high for the SOC.
D
DonMcOne
05-27-2021, 05:16 AM #3

I increased the iGPU overclock by adjusting the SOC to 1.2. It worked well on Ryzen master, though I’m limited to offset settings here. 1.416V seems quite high for the SOC.

U
UnicornCracker
Senior Member
663
05-27-2021, 12:46 PM
#4
Setting a fixed voltage with an offset ensures consistent performance and reduces errors.
U
UnicornCracker
05-27-2021, 12:46 PM #4

Setting a fixed voltage with an offset ensures consistent performance and reduces errors.

S
SynopsisPunk
Member
51
05-27-2021, 08:30 PM
#5
This setup helps balance VCORE to negative levels, though it only shows "Auto," "Normal," and higher positive SOCs. I've tested all three options and consistently see over 1.2V. I'm mainly concerned about the overall performance of my rig.
S
SynopsisPunk
05-27-2021, 08:30 PM #5

This setup helps balance VCORE to negative levels, though it only shows "Auto," "Normal," and higher positive SOCs. I've tested all three options and consistently see over 1.2V. I'm mainly concerned about the overall performance of my rig.

S
Snyleur
Junior Member
5
06-02-2021, 05:43 PM
#6
It's similar to entering +/- followed by a number.
S
Snyleur
06-02-2021, 05:43 PM #6

It's similar to entering +/- followed by a number.

N
Nashiko57
Senior Member
485
06-02-2021, 10:30 PM
#7
Yes, it functions somewhat, though it doesn't allow negative SOC values. Only VCORE is supported.
N
Nashiko57
06-02-2021, 10:30 PM #7

Yes, it functions somewhat, though it doesn't allow negative SOC values. Only VCORE is supported.

K
kcaz56
Senior Member
664
06-17-2021, 05:11 PM
#8
Final attempt resolved the CMOS issue; BIOS update worked smoothly. Version 1.26 performed well without major complications.
K
kcaz56
06-17-2021, 05:11 PM #8

Final attempt resolved the CMOS issue; BIOS update worked smoothly. Version 1.26 performed well without major complications.

K
Kuji
Member
133
06-18-2021, 05:50 AM
#9
I've noticed my CPU performance fluctuating—sometimes it slows down to 3881 or even drops to 582. When I leave it in auto mode, there are no drops, but the voltage reads 1.416V, which seems unusually high.
K
Kuji
06-18-2021, 05:50 AM #9

I've noticed my CPU performance fluctuating—sometimes it slows down to 3881 or even drops to 582. When I leave it in auto mode, there are no drops, but the voltage reads 1.416V, which seems unusually high.

M
mennogerben
Member
199
06-23-2021, 08:36 AM
#10
It's typical during startup? I thought removing the CMOS and refreshing the BIOS would help.
M
mennogerben
06-23-2021, 08:36 AM #10

It's typical during startup? I thought removing the CMOS and refreshing the BIOS would help.

Pages (3): 1 2 3 Next