overclocking ryzen 1600x

Arthurzinho11
Junior Member

10-24-2017, 01:58 PM

Should I adjust my SOC/nb voltage during overclocking? Your current setup of 3.9ghz at 1.33v on OC High Data with all threads for 40 minutes without issues is solid. You might consider a minor reduction in core voltage if you want further gains.

Arthurzinho11

10-24-2017, 01:58 PM #1

RatchIsMine
Junior Member

10-24-2017, 05:01 PM

Don't know about Aida, so not using it. OCCT for an hour or a bit longer should suffice. If unsure, increase the voltage slightly, as you have enough backup.

RatchIsMine

10-24-2017, 05:01 PM #2

Don't know about Aida, so not using it. OCCT for an hour or a bit longer should suffice. If unsure, increase the voltage slightly, as you have enough backup.

iOnlyMqcros
Junior Member

10-25-2017, 03:47 PM

Not really, you are doing good as it is, at 1.33v.

iOnlyMqcros

10-25-2017, 03:47 PM #3

Not really, you are doing good as it is, at 1.33v.

Knightchaser50
Junior Member

10-29-2017, 06:53 PM

theres something else. not sure if its a stability issue or not. when i run aida stress test it always fails at 30 mins or so but when i run occt high data set using all threads it went for 45 mins with no problems. does it matter that aida is trial version?

Knightchaser50

10-29-2017, 06:53 PM #4

Bram1107
Member

11-03-2017, 10:36 PM

Uncertain about Aida, skip it. One hour on OCCT is sufficient. If unsure, increase the voltage slightly—you still have backup.

Bram1107

11-03-2017, 10:36 PM #5

Uncertain about Aida, skip it. One hour on OCCT is sufficient. If unsure, increase the voltage slightly—you still have backup.

Termee2
Junior Member

11-08-2017, 01:40 AM

I actually adjusted it to 1.25v, but it goes up to 1.33v during OCCT, possibly needing a bit more to reach full stability. I’ll attempt an hour with the current settings.

Termee2

11-08-2017, 01:40 AM #6

I actually adjusted it to 1.25v, but it goes up to 1.33v during OCCT, possibly needing a bit more to reach full stability. I’ll attempt an hour with the current settings.