Overclocking ram on b450m ds3h mobo

111carys111
Posting Freak

832

03-10-2018, 03:22 AM

I've been attempting to push my Corsair Vengeance LPX 2400 2x8gb setup to higher speeds, but it won't let me adjust the settings or voltage. Any advice would be appreciated.
My system details: Ryzen 5 2600, GTX 1050 ti, Vengeance LPX 2400 2x8gb, B450m DS3H, 650w EVGA PSU.

111carys111

03-10-2018, 03:22 AM #1

king_Rick_05
Member

180

03-10-2018, 08:32 AM

OC similar to values above 2400MHz?

king_Rick_05

03-10-2018, 08:32 AM #2

OC similar to values above 2400MHz?

x_HmOoDy_KsA_x
Member

197

03-10-2018, 05:00 PM

When I set a speed in manual mode, it shows as 1333mhz. I'm using version F2 BIOS. What about yours?

x_HmOoDy_KsA_x

03-10-2018, 05:00 PM #3

When I set a speed in manual mode, it shows as 1333mhz. I'm using version F2 BIOS. What about yours?

Nick1king
Member

03-10-2018, 09:27 PM

It doesn't provide a way to adjust the speed, I'm also using F2 bios and intend to update it this evening. Edit: The available settings are only grayed out.

Nick1king

03-10-2018, 09:27 PM #4

It doesn't provide a way to adjust the speed, I'm also using F2 bios and intend to update it this evening. Edit: The available settings are only grayed out.

clix800
Member

122

03-11-2018, 12:21 AM

I'm trying for 2666MHz

clix800

03-11-2018, 12:21 AM #5

I'm trying for 2666MHz

thelittlegit
Member

186

03-12-2018, 12:55 PM

There is something that could assist you
The link provided offers a Ryzen DRAM calculator. Above the XMP value is quite unpredictable, it also relies on BIOS and AGESA version; you might attempt it, but such a large overclocking won't be obvious since the CAS latency will likely need to increase significantly. If you manage to reach 3000 or 3200MHz, that would be acceptable, otherwise 2666 is almost negligible.

thelittlegit

03-12-2018, 12:55 PM #6

GamenMetLeviNL
Senior Member

638

03-19-2018, 08:20 AM

There are no changes yet. The bios haven't been updated and the RAM hasn't been oc'ed.

GamenMetLeviNL

03-19-2018, 08:20 AM #7

There are no changes yet. The bios haven't been updated and the RAM hasn't been oc'ed.

luluurca
Junior Member

03-26-2018, 03:55 AM

It was just my own mistake, but I managed to get it through.
I changed channels to 2666 without any adjustments.

luluurca

03-26-2018, 03:55 AM #8

It was just my own mistake, but I managed to get it through.
I changed channels to 2666 without any adjustments.