overclocking ram is necessary when you're optimizing the cpu's performance
overclocking ram is necessary when you're optimizing the cpu's performance
Well, I'm being honest, the increase from 2133 to 2400 is modest. You might have noticed it if you were working with 2666 or higher (for example, a jump from 2400 to 3200 results in about a 15% improvement in intensive tasks). Regarding adjusting CPU voltage, I suggest looking for an overclocking guide specific to that motherboard to see if such information is available.
Hi ZRACE,
Thanks.
Well, I'll be honest, the jump from 2133 to 2400 is small. You'd have noticed it if you had 2666 and up though (e.g. 2400 to 3200 gives ~15% boost in intensive workloads)""
I higlly doubt that is possible as far as 3d rendering in Vray is conserned : from cpu 3.1 to 3.6 i got scene to render from 96 seconds to 85 seconds so gain close to 10-12% gain in productivity from 15-17% uping clock in CPU ..I would bet 1% in the best
..but since my 2x16gb ram is limitted to 2400 I would need to remove it and test only with the 2x8gb which is 3000Mhz..
Ok I will searcg again for the voltage..though I couldn't find one yet
In UEFI, CPU Voltage is frequently referred to simply as "VCore." It's possible the maker chose not to specify "CPU voltage"...