F5F Stay Refreshed Power Users Overclocking Overclocking memory and CPU along with questions

Overclocking memory and CPU along with questions

Overclocking memory and CPU along with questions

T
Tekjo
Junior Member
11
01-19-2016, 09:54 AM
#1
Hi everyone,

I recently built my own PC and was curious about how to overclock certain components. I found it possible to boost some parts, but encountered difficulties with the RAM (Memory). Specifically, I managed to raise the processor Intel Core i5 6600K from 3.50 GHz to 4.6 GHz using 1.320 volts. However, when trying to overclock the memory (Corsair LPX DDR4 2*8Gb 3200MHz), I only reached 2400MHz in the default settings.

I learned that I could increase my memory speed up to the advertised 3200MHz by using X.M.P. So, initially I focused on overclocking the CPU and verified stability with AIDA 64. Now I’m attempting to push the RAM further by enabling X.M.P., but when I restart to apply changes, it keeps looping.

I’ve reset the CMOS to refresh my BIOS, but the boot loop persists even after enabling X.M.P. for memory overclocking. The clock timing and other settings remain in Auto mode. According to CPU-Z, the RAM model is 3200MHz Model One.

I have a few questions:

1. Overclocking the CPU while trying to extend its lifespan? I’ve switched to MSI Overclocking Mode, which only reaches 4.1 GHz at 1.300 volts. Are there any differences in lifespan if I push it up to 4.6 GHz with 1.320 volts?
2. Should I pause overclocking for a while and restart? Or is there a better approach to maintain stability and quality?

Thanks a lot, and have a great day!
T
Tekjo
01-19-2016, 09:54 AM #1

Hi everyone,

I recently built my own PC and was curious about how to overclock certain components. I found it possible to boost some parts, but encountered difficulties with the RAM (Memory). Specifically, I managed to raise the processor Intel Core i5 6600K from 3.50 GHz to 4.6 GHz using 1.320 volts. However, when trying to overclock the memory (Corsair LPX DDR4 2*8Gb 3200MHz), I only reached 2400MHz in the default settings.

I learned that I could increase my memory speed up to the advertised 3200MHz by using X.M.P. So, initially I focused on overclocking the CPU and verified stability with AIDA 64. Now I’m attempting to push the RAM further by enabling X.M.P., but when I restart to apply changes, it keeps looping.

I’ve reset the CMOS to refresh my BIOS, but the boot loop persists even after enabling X.M.P. for memory overclocking. The clock timing and other settings remain in Auto mode. According to CPU-Z, the RAM model is 3200MHz Model One.

I have a few questions:

1. Overclocking the CPU while trying to extend its lifespan? I’ve switched to MSI Overclocking Mode, which only reaches 4.1 GHz at 1.300 volts. Are there any differences in lifespan if I push it up to 4.6 GHz with 1.320 volts?
2. Should I pause overclocking for a while and restart? Or is there a better approach to maintain stability and quality?

Thanks a lot, and have a great day!

J
juniorhockey
Member
171
01-19-2016, 10:54 AM
#2
Do you have the most recent BIOS? That could be sufficient. Alternatively, activate XMP, choose profile 1, and increase the DRAM voltage by 0.05 (safe). 😉
J
juniorhockey
01-19-2016, 10:54 AM #2

Do you have the most recent BIOS? That could be sufficient. Alternatively, activate XMP, choose profile 1, and increase the DRAM voltage by 0.05 (safe). 😉

F
Fokeiiz
Member
191
01-31-2016, 11:59 PM
#3
As long as you keep thermals under control through active cooling and voltage control the lifespan issue is negligible. CPUs automatically activate thermal throttling by shutting down clocks for short periods of time (nanoseconds) repeatedly when thermal limit is reached to reduce temperature and prevent permanent damage.
If your CPU is stable and temp is OK at a OC then there's no reason to change it and is safe to keep using those settings.
CPU lifespan is counted in decades
F
Fokeiiz
01-31-2016, 11:59 PM #3

As long as you keep thermals under control through active cooling and voltage control the lifespan issue is negligible. CPUs automatically activate thermal throttling by shutting down clocks for short periods of time (nanoseconds) repeatedly when thermal limit is reached to reduce temperature and prevent permanent damage.
If your CPU is stable and temp is OK at a OC then there's no reason to change it and is safe to keep using those settings.
CPU lifespan is counted in decades

A
Athenita
Member
164
02-01-2016, 01:18 AM
#4
Do you have the most recent BIOS? That could be sufficient. Alternatively, activate XMP, choose profile 1, and increase the DRAM voltage by 0.05 (safe). 😉
A
Athenita
02-01-2016, 01:18 AM #4

Do you have the most recent BIOS? That could be sufficient. Alternatively, activate XMP, choose profile 1, and increase the DRAM voltage by 0.05 (safe). 😉

M
mrminer02
Member
183
02-02-2016, 11:14 AM
#5
Do you have the newest BIOS? That might be all you require. Otherwise, try turning on XMP, pick profile 1, then increase the DRAM voltage by 0.05 (safe enough). 😉
All I needed was to update the BIOS
Thanks @Tradesman1
M
mrminer02
02-02-2016, 11:14 AM #5

Do you have the newest BIOS? That might be all you require. Otherwise, try turning on XMP, pick profile 1, then increase the DRAM voltage by 0.05 (safe enough). 😉
All I needed was to update the BIOS
Thanks @Tradesman1

B
154
02-02-2016, 05:03 PM
#6
Glad all is well, have fun
😉
B
Bellabell11295
02-02-2016, 05:03 PM #6

Glad all is well, have fun
😉