F5F Stay Refreshed Power Users Overclocking Overclocking i5 6600k

Overclocking i5 6600k

Overclocking i5 6600k

J
JosueGamer26
Member
124
05-25-2016, 03:17 AM
#1
I aim to boost my CPU speed to 4.0 GHz and need guidance on the process.
J
JosueGamer26
05-25-2016, 03:17 AM #1

I aim to boost my CPU speed to 4.0 GHz and need guidance on the process.

S
SnipeParty
Member
52
05-25-2016, 11:49 AM
#2
Adjust the CPU multiplier to 40 and test it out. The result will vary based on your specific 6600K, but it should work smoothly at stock voltage around 4.0.
S
SnipeParty
05-25-2016, 11:49 AM #2

Adjust the CPU multiplier to 40 and test it out. The result will vary based on your specific 6600K, but it should work smoothly at stock voltage around 4.0.

S
subsky
Junior Member
44
05-25-2016, 05:22 PM
#3
what evga unit?
S
subsky
05-25-2016, 05:22 PM #3

what evga unit?

M
mcbudder2004
Senior Member
687
05-25-2016, 07:25 PM
#4
What is this EVGA unit?
SuperNova G2 750w Gold
M
mcbudder2004
05-25-2016, 07:25 PM #4

What is this EVGA unit?
SuperNova G2 750w Gold

L
Loopsip
Member
55
05-26-2016, 04:58 AM
#5
Adjust the CPU multiplier to 40 and test it out. The result will vary based on your specific 6600K, but it should work smoothly at stock voltage around 4.0.
L
Loopsip
05-26-2016, 04:58 AM #5

Adjust the CPU multiplier to 40 and test it out. The result will vary based on your specific 6600K, but it should work smoothly at stock voltage around 4.0.

K
kenken0724
Member
178
05-27-2016, 09:15 AM
#6
Tradesman if he sets the multiplier to 40 and that's it, that wouldn't be stock voltage that would be auto voltage which could supply way more voltage than needed.
I'd start with 1.2v and run a stress test; if it passes, keep reducing the voltage until it fails, then increase it slightly back. If it fails at 1.2v, raise the voltage again by a small amount.
Just for reference, my 6600k runs at 4.5ghz with 1.35v.
K
kenken0724
05-27-2016, 09:15 AM #6

Tradesman if he sets the multiplier to 40 and that's it, that wouldn't be stock voltage that would be auto voltage which could supply way more voltage than needed.
I'd start with 1.2v and run a stress test; if it passes, keep reducing the voltage until it fails, then increase it slightly back. If it fails at 1.2v, raise the voltage again by a small amount.
Just for reference, my 6600k runs at 4.5ghz with 1.35v.