Overclocking amd 4130 causes a drop in fps?
Overclocking amd 4130 causes a drop in fps?
Let's begin by sharing what we have; I'm not particularly familiar with computers.
Hardware details:
CPU - AMD FX 4130
Memory - M5A78L-M LX3
Graphics - 1060 6GB
Cooler - Rajimtek CPU cooler (model uncertain)
RAM - Two 4GB DDR3 modules
Power Supply - Corsair vs450
I upgraded my graphics card to the 1060 with 6GB of memory (including three fans) from a GFX670 to run GTA5 and Overwatch with improved visuals.
For now, I plan to upgrade both my motherboard/CPU and RAM when funds permit. In the meantime, I'm trying to boost my CPU performance since it's limiting my graphics card's capabilities.
I attempted to use AMD Overdrive to achieve this. It seemed to increase performance slightly—about 0.3 from 3.8 to just over 4.1—without changing the voltage. I performed stability tests through the Overdrive program and didn't notice any problems; my CPU maintained a stable 41°C with speedfan monitoring.
Then I launched GTA and ran a benchmark test in graphics settings. The scores were lower than when I first started. Where am I going wrong? I've read many suggestions recommending BIOS tweaks, but because I have limited computer experience, I'm concerned about risking damage or causing more issues than I can handle.
Any advice would be greatly appreciated.
Thanks in advance.
Is the CPU throttling? It may reduce the clock speeds of those cores below even their stock rate. Make sure to check that first.
What make or model GTX 1060 do you have?
The power supply unit could also be the problem. The VS line is Corsair's budget range, and a 450W minimum for the GTX 1060 implies it won't allow overclocking at that level. The PSU's 34A/408W +12V rail is nearing its limit.
The motherboard isn't ideal for overclocking either. There are no heat syncs on the VRMs, and excessive heat will further hurt performance.
Is the CPU throttling? It will reduce the clock speeds of those cores below even the stock rate. Make sure to check that first.
What make and model GTX 1060 do you have?
The power supply unit could also be the problem. The VS line is Corsair's budget range. A minimum of 450W is suggested for the GTX 1060, which implies it won't allow overclocking at that level. The PSU's 34A/408W +12V rail is nearing its limit.
The motherboard isn't ideal for overclocking either. There are no heat syncs on the VRMs. Excessive heat will also hurt performance.
Is the CPU experiencing throttling? If yes, it will reduce the clock speeds of those cores below even their standard rate. Make sure that's the case first.
What make and model GTX 1060 do you own?
The PSU might also be the problem. The VS line is Corsair's budget range. A minimum of 450W is recommended for the GTX 1060, which implies it won't allow overclocking at that level. The PSU's 34A/408W +12V rail is nearing its limit.
The motherboard isn't ideal for overclocking either. There are no heat syncs on the VRMs; if they become too hot, performance will drop.
Thanks for your reply.
CPU throttling could have occurred because I was using Razer Cortex, which switches power plans depending on whether it's using Cortex or its own plan. I removed the program, but it remained as my preferred power setting. After adjusting these settings, benchmark tests showed improved FPS without any overclocking.
If you're not familiar with Razer Cortex, it's a program that closes unused processes and optimizes settings for gaming.
I own a ROG Strix 1060 with 6GB RAM. I don’t plan to overclock my graphics card since it performs adequately for my games.
I removed the OC settings I had set through OverDrive because I realized I lack the knowledge to modify them. I'm concerned about the PSU now—could it be affecting my new graphics card?
I intend to upgrade my CPU, RAM, and motherboard in a few months to something that meets my needs without overclocking. I was considering the Intel i5 4460, but I might need a better option yet.
Yeah, the FX-4130 will always limit the GTX 1060 regardless of how much you tweak the CPU. It’s better to stick with the stock setup and accept the GPU bottleneck until you can upgrade the system. Even the GTX 1050 Ti would face some limitations from the aging Bulldozer Zambezi. That was one of AMD's mistakes I think. The 4-core Zambezis can’t even match the CPUs they replaced in the Phenom II x4 lineup.
Your next build should use the newest Intel or AMD platform available at that time, even if you have to compromise on the CPU for budget reasons. Upgrading to a faster CPU later is straightforward once you have the funds. Even affordable options like the Ryzen 3 1200 (OC'd) or 1300X can still keep up with the GTX 1060.