F5F Stay Refreshed Power Users Overclocking Overclock works fine except for a small issue...

Overclock works fine except for a small issue...

Overclock works fine except for a small issue...

S
slick123
Junior Member
Find
4
02-04-2016, 06:13 PM
#1
Here are the details you provided:

My specs are 4790k, GA-Z97X-UD3H and a HX750 PSU.
OC settings included:
Clock freq - 102.13
Clock Ratio - 47 (totaling 4.8ghz)
Vcore - 1.36
CPU Vrin - 2.2
CPU Ring - 1.13
RAM was fine-tuned to compensate for frequency changes.
This overclock performed well on benchmarks and Prime95.
However, when I shut down the computer overnight and restarted it, it would briefly run before shutting down again. It would restart a few times, then display a boot error asking me to enter BIOS settings to adjust configurations. After entering BIOS and keeping settings unchanged, the system would boot normally as long as I didn’t restart it.
Any suggestions on what might be causing this issue? Are any of my settings risky?
Thanks in advance.
Reply
Reply
S
slick123
02-04-2016, 06:13 PM #1

Here are the details you provided:

My specs are 4790k, GA-Z97X-UD3H and a HX750 PSU.
OC settings included:
Clock freq - 102.13
Clock Ratio - 47 (totaling 4.8ghz)
Vcore - 1.36
CPU Vrin - 2.2
CPU Ring - 1.13
RAM was fine-tuned to compensate for frequency changes.
This overclock performed well on benchmarks and Prime95.
However, when I shut down the computer overnight and restarted it, it would briefly run before shutting down again. It would restart a few times, then display a boot error asking me to enter BIOS settings to adjust configurations. After entering BIOS and keeping settings unchanged, the system would boot normally as long as I didn’t restart it.
Any suggestions on what might be causing this issue? Are any of my settings risky?
Thanks in advance.

Reply
Reply
W
wahleno
Member
Find
243
02-20-2016, 10:44 PM
#2
This indicates the OC remains unstable during all tests.
Reply
Reply
W
wahleno
02-20-2016, 10:44 PM #2

This indicates the OC remains unstable during all tests.

Reply
Reply
T
Tenniskoppens
Member
Find
183
02-21-2016, 06:17 AM
#3
It indicates the OC remains unstable during testing. Therefore, the title
😛
is appropriate. As mentioned earlier, it performs well on benchmarks and prime95. I added that line to assist those evaluating the issue, not to confirm actual stability.
Reply
Reply
T
Tenniskoppens
02-21-2016, 06:17 AM #3

It indicates the OC remains unstable during testing. Therefore, the title
😛
is appropriate. As mentioned earlier, it performs well on benchmarks and prime95. I added that line to assist those evaluating the issue, not to confirm actual stability.

Reply
Reply