Overclock I7 6700K and 1070 at 500w power supply
Overclock I7 6700K and 1070 at 500w power supply
I anticipate it will work well, though it varies by unit type. A top-tier unit can handle close to full capacity without trouble, whereas a lower-grade model might produce unstable power even when operating at reduced loads. In the past, I ran an overclocked Q6600 with 105w TDP and two OC'd HD4870s (160w each) from a 460w power supply. It was one of the stronger systems available, lasting six to seven years before I replaced it all. Compared to your setup, your CPU has a 91w TDP and your GPU draws 150w. Your motherboard and RAM are likely more efficient than the older DDR2 and 775 boards I used previously.
I wouldn't. The 500W PSU is the lowest suggested for the GTX 1070. This is based on reference 1070; it isn't a factory overclocked version. Which Corsair PSU do you own?
I anticipate it will work well, though it varies by specific model. A premium unit can handle high loads without trouble, whereas a lower-end one might produce unstable power even at minimal usage. In the past, I owned a heavily overclocked Q6600 with a 105w TDP and two OC'd HD4870s (160w each) powered by a 460w supply. It was among the stronger systems of its time, lasting six to seven years before I replaced it. Compared to your setup, your CPU has a 91w TDP and your GPU draws 150w. Your motherboard and RAM are likely more efficient than the older DDR2 and 775 boards I used.
Another example is my system that consumes around 160w at the wall during stress tests with moderate overclocking—around 4ghz on the CPU and a slight GPU boost. Assuming 85% PSU efficiency, that means the power supply needs only about 135-140w, which makes the 400w unit more than sufficient even for an overclocked i5 and 1050 Ti.