F5F Stay Refreshed Power Users Overclocking overclock i7 3770k to 4.5 ghz

overclock i7 3770k to 4.5 ghz

overclock i7 3770k to 4.5 ghz

Pages (2): 1 2 Next
M
MrAgent
Member
50
01-16-2016, 04:29 PM
#1
you're new to overclocking and want to boost your i7 3770k processor. you've tried adjusting settings yourself, but it seems you might be making mistakes. you managed to keep the cpu stable at 4.5 ghz, but then you need to set the vcore to auto or manually set it to 1.310. however, under stress testing with prime95, your temps exceed 90 degrees celsius within just 10 minutes. you need guidance on the right bios settings.
M
MrAgent
01-16-2016, 04:29 PM #1

you're new to overclocking and want to boost your i7 3770k processor. you've tried adjusting settings yourself, but it seems you might be making mistakes. you managed to keep the cpu stable at 4.5 ghz, but then you need to set the vcore to auto or manually set it to 1.310. however, under stress testing with prime95, your temps exceed 90 degrees celsius within just 10 minutes. you need guidance on the right bios settings.

R
RIPtiger2364
Member
53
01-17-2016, 05:39 AM
#2
or it simply indicates that 4.5 exceeds what your chip can handle, you didn't do anything incorrect.
R
RIPtiger2364
01-17-2016, 05:39 AM #2

or it simply indicates that 4.5 exceeds what your chip can handle, you didn't do anything incorrect.

C
209
01-17-2016, 07:25 AM
#3
It looks like this chip doesn't meet expectations, falling short of a 4.5 rating.
C
CaptainFurioux
01-17-2016, 07:25 AM #3

It looks like this chip doesn't meet expectations, falling short of a 4.5 rating.

J
JohUrf
Junior Member
3
01-17-2016, 07:52 AM
#4
Ensure you're using the correct Prime95 version.
J
JohUrf
01-17-2016, 07:52 AM #4

Ensure you're using the correct Prime95 version.

M
Marinated
Senior Member
666
01-19-2016, 03:19 PM
#5
Why does that seem bad? It was the generation after Sandy, which could do 4.6-4.8, but it was soldered. Ivy was the first of the non-soldered ones; 4.5 is a stretch from what I remember. I got my 3570k to 4.3, I could have done 4.4, but I wouldn't have expected to reach 4.5.
M
Marinated
01-19-2016, 03:19 PM #5

Why does that seem bad? It was the generation after Sandy, which could do 4.6-4.8, but it was soldered. Ivy was the first of the non-soldered ones; 4.5 is a stretch from what I remember. I got my 3570k to 4.3, I could have done 4.4, but I wouldn't have expected to reach 4.5.

F
FuzzyMug
Senior Member
476
01-24-2016, 01:49 PM
#6
My i7-3770K operates smoothly at 4.9GHz with a voltage of 1.32v.
My i5-3570k caps at 4.3GHz regardless of settings or voltage, yet it functions well at 4.3GHz with a voltage of 1.114v.
This is the CPU lottery—every processor doesn’t reach identical performance limits.
The Antec kuhlor 620 is a 120mm rad, about 150w efficient.
Your i7 has a 77w TDP and performs normally at average usage.
Prime95 will push CPUs to their maximum under full load, which is peak power, not just TDP.
For an i5, peak power is roughly double the TDP, while an i7 with hyperthreading is around twice that.
This means you’re running a CPU that will exceed its stock limits at 150w under P95 conditions.
With any overclocking, expect temperatures to rise above 70°C and push your cooling solution to its limit.
In summary, P95 performance on an i7 with this cooler will likely drop into the 90s after OC.
F
FuzzyMug
01-24-2016, 01:49 PM #6

My i7-3770K operates smoothly at 4.9GHz with a voltage of 1.32v.
My i5-3570k caps at 4.3GHz regardless of settings or voltage, yet it functions well at 4.3GHz with a voltage of 1.114v.
This is the CPU lottery—every processor doesn’t reach identical performance limits.
The Antec kuhlor 620 is a 120mm rad, about 150w efficient.
Your i7 has a 77w TDP and performs normally at average usage.
Prime95 will push CPUs to their maximum under full load, which is peak power, not just TDP.
For an i5, peak power is roughly double the TDP, while an i7 with hyperthreading is around twice that.
This means you’re running a CPU that will exceed its stock limits at 150w under P95 conditions.
With any overclocking, expect temperatures to rise above 70°C and push your cooling solution to its limit.
In summary, P95 performance on an i7 with this cooler will likely drop into the 90s after OC.

K
Koollojoe
Posting Freak
830
01-26-2016, 01:39 AM
#7
where you suggest beginning, such as the initial voltage, to aim for 4.3 ghz. Are there specific adjustments you need to enable or disable, or is it mainly about changing the voltage and clock speed?
K
Koollojoe
01-26-2016, 01:39 AM #7

where you suggest beginning, such as the initial voltage, to aim for 4.3 ghz. Are there specific adjustments you need to enable or disable, or is it mainly about changing the voltage and clock speed?

N
NightmareB4
Junior Member
44
01-26-2016, 04:24 AM
#8
Begin by checking Google, Asus ROG forums, etc. The stock voltages on those Ivy boards usually range from 1.2v to 1.25v, but with a modest overclock like 4.3GHz you can achieve a smaller value. Just giving numbers without context won't help.

Review everything about the OC of the 3770k, your motherboard, and general overclocking. Look through forum discussions, search for unclear terms or functions and understand what they do.

Do all this before even modifying your BIOS.
N
NightmareB4
01-26-2016, 04:24 AM #8

Begin by checking Google, Asus ROG forums, etc. The stock voltages on those Ivy boards usually range from 1.2v to 1.25v, but with a modest overclock like 4.3GHz you can achieve a smaller value. Just giving numbers without context won't help.

Review everything about the OC of the 3770k, your motherboard, and general overclocking. Look through forum discussions, search for unclear terms or functions and understand what they do.

Do all this before even modifying your BIOS.

X
Xytrixz
Senior Member
552
01-27-2016, 03:59 AM
#9
I completed Cinebench R15 with an overclock reaching 4.5 GHz stable at 1.310 volts, achieving a score of 814, though there are still some significant fluctuations.
X
Xytrixz
01-27-2016, 03:59 AM #9

I completed Cinebench R15 with an overclock reaching 4.5 GHz stable at 1.310 volts, achieving a score of 814, though there are still some significant fluctuations.

J
jamie2k
Member
51
01-31-2016, 12:44 PM
#10
At 4.5GHz you shouldn't see much, if any, over 1.2v. Consider checking aspects like LLC mode, disabling eco settings such as cpu-phases, and turning off c-states.
J
jamie2k
01-31-2016, 12:44 PM #10

At 4.5GHz you shouldn't see much, if any, over 1.2v. Consider checking aspects like LLC mode, disabling eco settings such as cpu-phases, and turning off c-states.

Pages (2): 1 2 Next