Optimizing Wi-Fi bridge performance...
Optimizing Wi-Fi bridge performance...
I began working remotely and had numerous VoIP calls on my home PC. Eventually, I plan to connect via cable to my office setup. For now, I rely on Wi-Fi. To boost performance, I purchased a second AC1300 router and connected it to my main network, which links to an AC1300 wireless bridge in the office. This setup makes devices in the office treat themselves as wired connections. No other device is utilizing this new router’s 5G link, so the bridge remains the sole 5G connection. On some devices—like tablets—I’m using the second router’s 2.4GHz band because it performs better in my office or bedroom compared to my current Wi-Fi.
My concerns are whether using this second router’s 2.4GHz connection affects its speed or bandwidth allocation, or if it reduces performance. Also, I understand that enabling router mode adds double NAT, which enhances security but may impact speed. Switching it to just an access point would simplify things, though I’d prefer keeping the office network distinct from my home network if possible.
Only start saturating your WAN or a destination port, though that seems improbable. NAT isn't security—it has some side effects but isn't secure itself. It creates issues independently, but double NAT makes things worse. It's wiser to switch to AP and set up a second DHCP pool and gateway separate from the 5G. Enable guest mode on the 5G and let it manage everything. This keeps networks properly isolated. For true separation, you'll need another router plus VLAN/ACLs.