Opinions on future network setup
Opinions on future network setup
Here are some alternative ways to phrase your plan:
- Networking setup details: Pricing includes various modems and cables ranging from $170 to $380, plus fiber options.
- Total estimated cost is around $1,288, with some flexibility depending on cable length.
- You're considering a week or two before finalizing the budget for these purchases.
- Any feedback or improvements would be appreciated as you decide.
It would be much more affordable, likely with lower cabling costs and faster speeds later. Here’s a 100m om3 option for $50 – https://www.fs.com/products/74386.html. I’ll stick with OS2 still. Do you really need a 10g line between those floors? None of the options seem to require that speed. Just noting, generic solutions from FS are half the price and work well. Consider upgrading to nano HD for better performance. How big is your house? You might want more APs to maintain strong 5G connectivity if you need faster Wi-Fi.
My home spans 4,000 square feet with a brick exterior, which is why I considered hiring two professionals. It isn’t wired for Ethernet—there are only a few ports, one in the office for the router and another where the switch connects. The existing cable will be replaced with fiber. I need to lay cables under floor radiators for my TV and computer. Ideally, I’d have more access points besides the ones I currently have.
You likely need more than two APs, probably aiming for four or more. It’s better to go with a nano HD setup instead of just two APs. You can arrange the Unifi APs in a wireless mesh configuration—still superior to using only two. Keep the Ethernet cable if you have it; you don’t appear to require 10G speeds right now. Upgrade later if necessary. Also, this switch doesn’t support 10G; it’s a 1GbE SFP port, not an SFPD+. The most affordable 10G switch with PoE from Unifi is the 24-port Switch Pro for $700. https://store.ui.com/collections/unifi-n...pro-24-poe
Consider using wireless solutions or hidden conduits to avoid visible cable runs. Since your attic and finished ceiling limit direct access, explore alternatives that keep wiring concealed.
That would significantly hinder their performance. I might be able to test them locally, but reaching the ceiling for the APs would be a challenge.
My attic and basement are all done. The basement is only partially completed. It might take a while. Right now, I have about 50 Mbps via WiFi using xFi pods. I’m paying for 1 gigabit per second internet.
It seems like you're considering a lot of equipment for a situation that might not require it. Adding PoE without using devices that rely on it can be costly. In an optimal setup, you'd likely eliminate unnecessary components and use a wired Ethernet switch above and a cable modem below. For more ports, another switch would suffice. This approach is suitable for locations exceeding 180ft (55m). If the modem's internal WiFi isn't strong enough, repeaters are an option, though they may not be the best choice. Generally, your plan appears expensive compared to the space involved. Cat6 can support 10G speeds and handle PoE without needing separate insertion points. If you're mainly concerned about physical cabling, fiber is still necessary.