F5F Stay Refreshed Hardware Desktop Only one specific hard drive connected halts the computer from posting.

Only one specific hard drive connected halts the computer from posting.

Only one specific hard drive connected halts the computer from posting.

D
Darkaimonds
Member
74
08-24-2018, 09:14 PM
#1
My computer didn't start today even though it was running perfectly for three months. It's still using the same setup, and when I shut it down last night everything was fine. I have an MSI B450 motherboard, which doesn't show a postcode, but it has error lights and the GPU error light is on. I thought my GPU failed, but it worked when I used another system. I began removing the cables one by one and noticed it stopped booting only when both drives were connected. When I plugged in the drives one at a time, just one was blocking startup. I've tried different combinations and they all work. So this particular drive seems to be the issue. I'm wondering if the power supply unit might be the problem, or maybe the motherboard is misidentifying it as the GPU when it's actually dead. Any idea what's happening?
D
Darkaimonds
08-24-2018, 09:14 PM #1

My computer didn't start today even though it was running perfectly for three months. It's still using the same setup, and when I shut it down last night everything was fine. I have an MSI B450 motherboard, which doesn't show a postcode, but it has error lights and the GPU error light is on. I thought my GPU failed, but it worked when I used another system. I began removing the cables one by one and noticed it stopped booting only when both drives were connected. When I plugged in the drives one at a time, just one was blocking startup. I've tried different combinations and they all work. So this particular drive seems to be the issue. I'm wondering if the power supply unit might be the problem, or maybe the motherboard is misidentifying it as the GPU when it's actually dead. Any idea what's happening?

F
Fijiboys777
Member
196
08-24-2018, 10:15 PM
#2
It seems the failed drive is blocking the system's self-check during startup. Identifying the drive type could help. A spinning disk might be involved, or there could be an older mechanical setup.
F
Fijiboys777
08-24-2018, 10:15 PM #2

It seems the failed drive is blocking the system's self-check during startup. Identifying the drive type could help. A spinning disk might be involved, or there could be an older mechanical setup.

H
Hanshb3
Member
132
08-30-2018, 11:51 AM
#3
I just tested another SATA cable and it worked the same way. I believe you're correct. It's an HDD, not an SSD. I'll give it the freezer trick—nothing important is on it, but it's my main steam drive and emulation drive.
H
Hanshb3
08-30-2018, 11:51 AM #3

I just tested another SATA cable and it worked the same way. I believe you're correct. It's an HDD, not an SSD. I'll give it the freezer trick—nothing important is on it, but it's my main steam drive and emulation drive.

C
coyote888
Posting Freak
838
09-02-2018, 04:43 PM
#4
Is it really working? The "clicking of death" might boost the chances. Luckily, nothing crucial is affected. Seagate?
C
coyote888
09-02-2018, 04:43 PM #4

Is it really working? The "clicking of death" might boost the chances. Luckily, nothing crucial is affected. Seagate?

M
metalstone28
Member
98
09-24-2018, 03:51 AM
#5
The freezer method isn't effective anymore for today's storage devices because of the extreme density and precise requirements.
M
metalstone28
09-24-2018, 03:51 AM #5

The freezer method isn't effective anymore for today's storage devices because of the extreme density and precise requirements.