F5F Stay Refreshed Hardware Desktop Only one RAM stick is compatible with this new GPU.

Only one RAM stick is compatible with this new GPU.

Only one RAM stick is compatible with this new GPU.

Y
yoruyohan
Member
114
02-11-2023, 01:54 PM
#1
Hello! Your setup seems to be working fine with your current configuration, but when using two RAM sticks together it fails. Since your motherboard supports dual RAM slots and your ASUS H110M-E/M.2 supports dual DIMMs, the issue might be related to how your system detects or handles the memory modules. Try checking if both sticks are seated properly in their respective slots, ensuring no physical damage or misalignment. Also, verify that your power supply can handle the increased load and that the BIOS is set up correctly for dual RAM. If the problem persists, consider consulting ASUS support or a professional technician.
Y
yoruyohan
02-11-2023, 01:54 PM #1

Hello! Your setup seems to be working fine with your current configuration, but when using two RAM sticks together it fails. Since your motherboard supports dual RAM slots and your ASUS H110M-E/M.2 supports dual DIMMs, the issue might be related to how your system detects or handles the memory modules. Try checking if both sticks are seated properly in their respective slots, ensuring no physical damage or misalignment. Also, verify that your power supply can handle the increased load and that the BIOS is set up correctly for dual RAM. If the problem persists, consider consulting ASUS support or a professional technician.

I
iHyper
Junior Member
43
02-12-2023, 01:10 AM
#2
It seems unusual, but the motherboard might not handle both expansion slots at once, especially if it can't deliver the full bandwidth of PCIe16.
I
iHyper
02-12-2023, 01:10 AM #2

It seems unusual, but the motherboard might not handle both expansion slots at once, especially if it can't deliver the full bandwidth of PCIe16.

X
Xman2525
Junior Member
38
02-13-2023, 06:16 PM
#3
Did you enable XMP? Clearing the CMOS might resolve the issue and allow it to start normally.
X
Xman2525
02-13-2023, 06:16 PM #3

Did you enable XMP? Clearing the CMOS might resolve the issue and allow it to start normally.

X
xXStrikeBackXx
Member
220
02-13-2023, 08:04 PM
#4
Sure, I'll look into the BIOS for those options and attempt to turn them on. See you later!
X
xXStrikeBackXx
02-13-2023, 08:04 PM #4

Sure, I'll look into the BIOS for those options and attempt to turn them on. See you later!

X
xanderzone317
Posting Freak
957
02-18-2023, 04:49 PM
#5
Hi, sorry to hear this. I attempted to enable XMP settings but still couldn't start the system with two sticks. Further inspection shows only one RAM module is detected. Swapping the working stick into the other slot didn’t resolve the issue, indicating a possible faulty or damaged RAM component. Thanks for your assistance!
X
xanderzone317
02-18-2023, 04:49 PM #5

Hi, sorry to hear this. I attempted to enable XMP settings but still couldn't start the system with two sticks. Further inspection shows only one RAM module is detected. Swapping the working stick into the other slot didn’t resolve the issue, indicating a possible faulty or damaged RAM component. Thanks for your assistance!