Only a 10 Mbps connection is available for the computer.
Only a 10 Mbps connection is available for the computer.
Hello, I encountered an issue where my Ethernet connection caps at 10.0 Mbps. Testing the cable on various devices within the same network showed 200 Mbps performance. After updating the MSI MPG x570 gaming edge Wi-Fi drivers, the problem persisted. The router, modem, and cable all function correctly, suggesting the driver might be the root cause. I attempted to adjust the driver settings for higher speeds, but none resolved the issue online.
Ethernet operates at standard speeds, typically up to 10Mbps. You can achieve those speeds on networks with proper cabling and configuration. Your network setup likely includes twisted-pair or fiber connections depending on the distance and bandwidth needs.
What is the total length of this Ethernet cable? The stated maximum speed is the NIC capability, but it still feels limited compared to a modern motherboard with gigabit LAN support. Have you installed the Realtek drivers from MSI or did Windows Update automatically detect and install them? Did you also add all other drivers available on MSI’s site? In Device Manager, are any devices marked as needing no action? Does each of your router’s LAN connections support gigabit speeds? Also, some modems or gateways might have multiple ports with varying speeds. Verify that your router is linked to the fastest port on the device.
The length measures 50ft. I downloaded the drivers from the MSI site for my motherboard and enabled Windows auto-detection at startup, which didn’t require any adjustments in Device Manager. All router ports support gigabit speeds, but testing multiple ports showed a single computer achieving only 200Mbps on the same router.
For that Cat6 size, expect around 1Gbps when both ends use gigabit ports. Consider switching to another cable, even if it's Cat5E, to check for improvements. It might indicate a faulty connection.
The reported speed is based on network properties or online tests like DSL Reports or SpeedTest.net. In theory, the cable should support faster LAN speeds, which your NIC would display. But real-world connections often limit performance to what your plan allows. You may also want to inspect the router for any throttling on the LAN port or for your specific IP/MAC address. Testing with a different Ethernet cable can help confirm this. A short Cat5e run is usually affordable.
The 200Mbps result came from speedtest.com, but the network properties show a maximum of 1Gbps on the NIC. You might want to check the router settings for specific details. It seems the issue could be related to the motherboard's NIC.
You're likely paying around 200Mbps for your internet connection. Even with a faster local network, you won't surpass this limit. For the motherboard, navigate to adapter properties > Configure, turn off "power saving," then proceed to Advanced settings. Choose "1.0 Gbps full duplex" (or higher) and disable any power-saving options there. In the router's admin panel, find settings about "bandwidth throttling" or "traffic shaping"—terms vary by brand.