Once I'm working on FX 8350 / M5A99FX PRO R2.0
Once I'm working on FX 8350 / M5A99FX PRO R2.0
It's my first time overclocking and I'm trying to do it wisely.
Begin by increasing the CPU multiplier and observe the performance limits under all automatic configurations. You should likely reach around 4.2 GHz. Going beyond that would almost certainly need manual settings, disabling turbo and all power-saving options. This approach could push you to about 4.4 GHz, but only if the cooler can handle the heat. This is typical for most standard CPUs, though results may vary between different models.
Begin by increasing the CPU multiplier and observe the performance limits under all auto configurations. You should likely reach around 4.2 GHz. Going further in overclocking would likely need manual settings with turbo disabled and power-saving features turned off, which could push you up to 4.4 GHz before the cooler fails. This applies to most standard CPUs, though results may vary between different models. I made a mistake by not answering the question clearly. I’ve studied all the overclocking steps but am unsure which part to tackle first—DIMM, motherboard, CPU, or component X?