OC'ing isn't detected in HWiNFO64 or CPUID, appearing as if the stock frequency is correct.
OC'ing isn't detected in HWiNFO64 or CPUID, appearing as if the stock frequency is correct.
Hey, in the ASRock UEFI I enabled XMP and adjusted the DRAM frequency to 3333 for my D432GB 3000-15 KLEVV CRAS II RLED K2 ESS to run overclocked or at least at 3000 MHz. However, when booted, my read-out tools show a clock speed around 1650.4 MHz (current clock) with a maximum supported memory clock of 1333.3 MHz. Can I ensure the RAM operates at higher speeds? The system uses Z390 with an i5 9600k processor at 5.1 GHz.