Occasional restarts or blue screen occurrences.
Occasional restarts or blue screen occurrences.
Hey there! So you've been dealing with some persistent blue screen issues after upgrading your RAM. You've tried several fixes like changing the CPU, updating drivers, and even reformatting your OS. The latest troubleshooting steps included using different RAM types, checking the BIOS, and reaching out to MSI. They mentioned a compatibility issue with the new RAM version. Your specs show you're using a relatively modern motherboard and have tried various solutions without success. It sounds like the problem might be related to the RAM not being fully compatible with your system or possibly a deeper hardware conflict. Have you considered testing with a known-good RAM module to rule out faulty hardware?
Have you attempted to reset the motherboard's CMOS? If not, I recommend trying that. I can provide step-by-step guidance if you're unfamiliar with the process. It's likely that adding more RAM inadvertently altered your BIOS configuration. Frequent crashes and blue screens typically stem from defective RAM or incorrect BIOS settings. Since replacing the RAM hasn't resolved the issue, a BIOS-related problem seems more probable. Clearing the CMOS is a solid first step.
I experienced a similar problem with my new build a few months back. I had a Ryzen 3 3100 Gigabyte x570UD paired with Corsair Vengeance 2 x 8GB 3200MHz CL16. After setting the XMP profile, I started encountering blue screens during prolonged use. When I switched to default speeds, it resolved. Overclocking manually to 3000MHz CL15 worked without issues. However, following several BIOS updates, the XMP feature now functions properly. The store where I bought the components advised checking my QLV list—my model wasn’t listed—and noted that Ryzen CPUs are quite selective with RAM. They recommended updating the BIOS to the latest version and applying default settings, as this resolved the problem for me. Try running each configuration individually to see if they function independently. If one works, it may be compatible with the other. It’s possible there could be different chips on the PCB or slight timing variations, so swapping them might help identify the issue.
Apologies for the delayed response—I was making progress! The BSOD I encountered was a THREAD STUCK IN DEVICE DRIVER issue, which resolved after updating the BIOS. Regarding voltage and frequency, I’ve applied whatever XMP profiles or default settings you prefer; let me know if you’d like them.
I'd look into what XMP is adjusting for. Some motherboards are problematic, and XMP can lead to RAM issues. On my board, XMP sets the RAM voltage to 1.2, which is lower than the required 1.35. If the voltage is too low, it might cause crashes and blue screens, just like with my PC.