OC Settings Guide 13700K
OC Settings Guide 13700K
I’d evaluate the retraining consistency, as the 13th-gen version has problems where running settings causes failure after about three hours of operation. Retraining the memory helps but still ends up failing within three minutes.
Check the current version of the memory test configuration. If you need the newest, look for "Memory Test config file v0.02." Otherwise, proceed with the standard procedure.
Save your profile, reset CMOS, restart to Windows, return to BIOS and turn it back on. Re-enable the profile again. Come back into Windows and test VST; if retraining fixed instability, it should stop within 10 minutes. I usually do this 3 or 4 times. I don’t use Absolut, so I can’t say much about it. I personally stick with 1usmus_V3 since that’s what caused the most issues on my system. If you’re okay with Absolut, that’s probably fine too.
It's due to Gear 2, which has been problematic since its release in the 11th generation and is also present in Gear 2 on DDR4. The memory training page I know about covers various algorithms available on the board; they can sometimes assist with starting up or slightly boost performance, but generally you don't need to adjust them unless you're particularly interested. The system manages these automatically.
I was thinking of having my OC try Absolut during my shift today. It seems I might have made a mistake since it only ran three cycles. I’ll try again tomorrow.
Well, things are really confusing right now. For a joke, I adjusted it a bit and matched a friend's configuration. They use the 13900KS model. I managed to clear it without any issues. This behavior is completely puzzling to me.