F5F Stay Refreshed Power Users Overclocking OC i5-3570 help/advice

OC i5-3570 help/advice

OC i5-3570 help/advice

D
DarkMark3
Junior Member
12
11-30-2017, 09:15 AM
#1
System Specifications:
I5 3570 processor
16GB DDR3 memory
Hyper 212 cooler
MSI H77 motherboard
500W power supply
RX 570 graphics card with 4GB RAM
With OC Genie and turbo settings, I reached around 3.9GHz and maintained stable temperatures. Only one core hit up to 51°C while the others stayed at 49°C. I’m eager to push further. As a beginner, I’m unsure if this is feasible and wonder if manual adjustments could help. I’ve reviewed many guides, but they mostly focus on cooling concerns. I just want to find the right settings and a solid starting point. I’m not worried about risks and am keen to experiment firsthand. Any simple advice would be greatly appreciated.
Thanks in advance!
D
DarkMark3
11-30-2017, 09:15 AM #1

System Specifications:
I5 3570 processor
16GB DDR3 memory
Hyper 212 cooler
MSI H77 motherboard
500W power supply
RX 570 graphics card with 4GB RAM
With OC Genie and turbo settings, I reached around 3.9GHz and maintained stable temperatures. Only one core hit up to 51°C while the others stayed at 49°C. I’m eager to push further. As a beginner, I’m unsure if this is feasible and wonder if manual adjustments could help. I’ve reviewed many guides, but they mostly focus on cooling concerns. I just want to find the right settings and a solid starting point. I’m not worried about risks and am keen to experiment firsthand. Any simple advice would be greatly appreciated.
Thanks in advance!

K
Kimplaze
Member
216
11-30-2017, 10:11 PM
#2
3.99ghz fits well for auto oc with bclk because the stock turbo is 38 x 105=3.99 but with z77 it should have used multi. Many people overlook that sb and ib had restricted oc compared to other non-k generations, so yes, you can achieve oc beyond just bclk. If you have z77 instead of h77, then oc performance improves significantly. The cpuz in your sig indicates h77, which means you likely do have h77 and cannot exceed that speed. With non-k on z77, z75, p67, and z68 mobos, you're limited to multi 4 bins above turbo, resulting in around 42. If you're aiming for the highest possible, bclk 105 is usually the upper limit. You might be able to push higher, but most units won't be stable; you may not even reach 105. A value of 42 x 105 equals 4.4ghz. Apart from bclk and multi, adjusting vcore could help.
K
Kimplaze
11-30-2017, 10:11 PM #2

3.99ghz fits well for auto oc with bclk because the stock turbo is 38 x 105=3.99 but with z77 it should have used multi. Many people overlook that sb and ib had restricted oc compared to other non-k generations, so yes, you can achieve oc beyond just bclk. If you have z77 instead of h77, then oc performance improves significantly. The cpuz in your sig indicates h77, which means you likely do have h77 and cannot exceed that speed. With non-k on z77, z75, p67, and z68 mobos, you're limited to multi 4 bins above turbo, resulting in around 42. If you're aiming for the highest possible, bclk 105 is usually the upper limit. You might be able to push higher, but most units won't be stable; you may not even reach 105. A value of 42 x 105 equals 4.4ghz. Apart from bclk and multi, adjusting vcore could help.

E
EAKHD
Junior Member
19
12-06-2017, 11:57 PM
#3
You're unable to proceed with that module since it's locked. It's probable someone is already utilizing bclk for oc, and using this approach isn't advised because it risks corrupting the file due to its connection with other components, including storage.
E
EAKHD
12-06-2017, 11:57 PM #3

You're unable to proceed with that module since it's locked. It's probable someone is already utilizing bclk for oc, and using this approach isn't advised because it risks corrupting the file due to its connection with other components, including storage.

Z
zachblack123
Junior Member
49
12-07-2017, 01:09 AM
#4
He's correct. The non-K CPUs are secured, and I wouldn't suggest any changes except sticking to the advertised 3.8ghz (single core) performance (3.6 all core turbo), which means... keep it as is.
Z
zachblack123
12-07-2017, 01:09 AM #4

He's correct. The non-K CPUs are secured, and I wouldn't suggest any changes except sticking to the advertised 3.8ghz (single core) performance (3.6 all core turbo), which means... keep it as is.

J
Jarzzermann
Posting Freak
788
12-17-2017, 11:01 AM
#5
But as I mentioned, I'm not worried about file corruption or any other problems. I just want to test how far I can go. If you think it's truly impossible, then no problem. If it is, I'd like to know more. Right now every core is running at 3.99/3.95 anyway.
J
Jarzzermann
12-17-2017, 11:01 AM #5

But as I mentioned, I'm not worried about file corruption or any other problems. I just want to test how far I can go. If you think it's truly impossible, then no problem. If it is, I'd like to know more. Right now every core is running at 3.99/3.95 anyway.

S
Studdy
Junior Member
7
12-22-2017, 11:47 PM
#6
You can perform non-K OC on that CPU, though you'd require a Z77 motherboard. It seems "OC Genie" is handling BCLK overclocking. I wasn't expecting that to be an option for H mobos, but it actually is.
S
Studdy
12-22-2017, 11:47 PM #6

You can perform non-K OC on that CPU, though you'd require a Z77 motherboard. It seems "OC Genie" is handling BCLK overclocking. I wasn't expecting that to be an option for H mobos, but it actually is.

L
lizzy_948
Member
148
12-24-2017, 04:42 AM
#7
I'm sorry, but there was an error in my previous message. The correct model is the MSI Z77A-G43, not the H77.
L
lizzy_948
12-24-2017, 04:42 AM #7

I'm sorry, but there was an error in my previous message. The correct model is the MSI Z77A-G43, not the H77.

W
wart666
Junior Member
33
12-25-2017, 07:14 PM
#8
If you adjust the base clock: You may attempt increasing it gradually until instability occurs during a stress test. Afterward, reduce BCLK and verify its stability. Base clock overclocking is not recommended as it can damage files or lead to problems such as USB ports malfunctioning. In this case, the CPU is locked on a motherboard that does not support overclocking, which was not anticipated.
W
wart666
12-25-2017, 07:14 PM #8

If you adjust the base clock: You may attempt increasing it gradually until instability occurs during a stress test. Afterward, reduce BCLK and verify its stability. Base clock overclocking is not recommended as it can damage files or lead to problems such as USB ports malfunctioning. In this case, the CPU is locked on a motherboard that does not support overclocking, which was not anticipated.

R
R_Jayy_Kae
Member
84
12-26-2017, 05:01 PM
#9
Never thought so, nor planned that way. I'm switching to a Ryzen and thought I'd test this device until it fails. Thanks for the tip—I really value it.
R
R_Jayy_Kae
12-26-2017, 05:01 PM #9

Never thought so, nor planned that way. I'm switching to a Ryzen and thought I'd test this device until it fails. Thanks for the tip—I really value it.

A
Alan4041
Member
210
12-29-2017, 08:14 AM
#10
3.99ghz fits well with auto OC using BCLK because the stock turbo is 38 x 105=3.99 but with Z77 it should have used multi. Many people overlook that SB and IB had restricted OC compared to other non-K generations, so yes you can achieve OC beyond just BCLK. If you have Z77 and not H77, then OC to a solid speed is possible. The CPUZ in your signature indicates H77, so it seems you actually do have H77 and you can't exceed that. With non-K on Z77, Z75, P67, and Z68 modules, you're limited to multi 4 bins above turbo, which is 42. If you're just testing the limits, BCLK 105 is usually the upper bound. You might be able to push higher but most won't be stable. You may not even reach 105. 42 x 105 equals 4.4ghz. Apart from BCLK and multi, adjusting Vcore helps; other settings don't significantly improve stability and aren't necessary for this level of OC.
A
Alan4041
12-29-2017, 08:14 AM #10

3.99ghz fits well with auto OC using BCLK because the stock turbo is 38 x 105=3.99 but with Z77 it should have used multi. Many people overlook that SB and IB had restricted OC compared to other non-K generations, so yes you can achieve OC beyond just BCLK. If you have Z77 and not H77, then OC to a solid speed is possible. The CPUZ in your signature indicates H77, so it seems you actually do have H77 and you can't exceed that. With non-K on Z77, Z75, P67, and Z68 modules, you're limited to multi 4 bins above turbo, which is 42. If you're just testing the limits, BCLK 105 is usually the upper bound. You might be able to push higher but most won't be stable. You may not even reach 105. 42 x 105 equals 4.4ghz. Apart from BCLK and multi, adjusting Vcore helps; other settings don't significantly improve stability and aren't necessary for this level of OC.