Observing the display issues is occurring. Resolution alignment appears incorrect.
Observing the display issues is occurring. Resolution alignment appears incorrect.
You're experiencing an alignment issue between your display and the Windows interface. It sounds like the monitor's resolution doesn't match the screen's native resolution, causing the borders to misalign. Since you've already checked the settings and installed drivers, here are a few steps you can try:
1. **Check Display Settings**: Ensure your monitor is set to match the actual resolution (1920x1080 in your case). Sometimes, the display settings might be off by default.
2. **Update Drivers**: Even though you've installed drivers, it's worth double-checking for the latest versions from the manufacturer (MSI or Dell).
3. **Resolution Mismatch Fix**:
- Go to **Settings > System > Display**.
- Adjust the resolution to match your monitor's native resolution (1920x1080).
- If you're using a scaling factor, make sure it's set correctly (usually 1.0).
4. **Reinstall Graphics Driver**: If the issue persists, try uninstalling and reinstalling the graphics driver.
5. **Check for BIOS Updates**: Ensure your motherboard BIOS is up to date, as some updates can affect display settings.
If none of these work, it might be a hardware issue or a deeper system conflict—consider reaching out to MSI support or contacting your PC manufacturer for further assistance.
The screen likely has various controls for adjusting settings and accessing functions.
It's a joystick device with various functions based on movement direction, and it continues to operate smoothly on my primary computer.
In fact, I resolved it by swapping the cable from the second PC to HDMI 1 and HDMI 2, then placing the main build on the second port. The issue remains consistent—one port supports 1920x1080 while the other doesn’t. If that’s accurate, I’ll mark this as the answer. Otherwise, I’m happy to try a fix so both devices display properly without changing ports. Thanks.