NZXT internal USB hub design

Pages (2): 1 2 Next

AnalogClock
Junior Member

03-05-2023, 10:33 AM

I require an additional internal USB port to monitor its voltages. I've connected two devices and need one more (power supply). I bought this hub and wanted to know how to connect it properly. Is there any chance the header could damage the motherboard? Since it uses a USB splitter through a single USB port on the motherboard.

AnalogClock

03-05-2023, 10:33 AM #1

Zytez123
Junior Member

03-08-2023, 04:56 AM

mostly okay it will.

Zytez123

03-08-2023, 04:56 AM #2

mostly okay it will.

XxMegaGirlxX
Junior Member

03-08-2023, 12:18 PM

I've tested it without any problems before.

XxMegaGirlxX

03-08-2023, 12:18 PM #3

I've tested it without any problems before.

SnifePvP
Posting Freak

872

03-16-2023, 12:15 AM

Sure, connect the motherboard header to the white header on the hub, then link the hub to your device. For the black ports, ensure they match the hub’s configuration and power them accordingly.

SnifePvP

03-16-2023, 12:15 AM #4

Sure, connect the motherboard header to the white header on the hub, then link the hub to your device. For the black ports, ensure they match the hub’s configuration and power them accordingly.

DCarleton
Junior Member

03-21-2023, 08:17 AM

Connect one end to the SATA port for power, then use one cable to attach it to the USB 2 header on your motherboard.

DCarleton

03-21-2023, 08:17 AM #5

Connect one end to the SATA port for power, then use one cable to attach it to the USB 2 header on your motherboard.

pocio77
Posting Freak

783

03-21-2023, 05:15 PM

I didn't plug anything into it.

pocio77

03-21-2023, 05:15 PM #6

I didn't plug anything into it.

_Fenya_
Junior Member

03-26-2023, 11:55 AM

I connected some Corsair RGB and Commander Pro devices to it. My X370 Asus Crosshair VI Hero only has one USB 2 port, which made it essential for my setup.

_Fenya_

03-26-2023, 11:55 AM #7

I connected some Corsair RGB and Commander Pro devices to it. My X370 Asus Crosshair VI Hero only has one USB 2 port, which made it essential for my setup.

Potansky
Member

166

03-26-2023, 06:55 PM

I don't know how safe is this thing,since I'll hook up H100i and Thernaltake FAN Controller. Don't know if device shorts out it maybe can damage my pump on H100i or FAN controller. It's expensive,should be safe.

Potansky

03-26-2023, 06:55 PM #8

Karina
Junior Member

03-27-2023, 03:47 AM

Every organization positions you precisely as intended

Karina

03-27-2023, 03:47 AM #9

Every organization positions you precisely as intended

Ciera7
Member

225

04-07-2023, 01:33 PM

#10

what u mean by that?

Ciera7

04-07-2023, 01:33 PM #10

what u mean by that?

Pages (2): 1 2 Next