Nvidia reports issues on Manjaro.
Nvidia reports issues on Manjaro.
Lspci -v: 2:00.0 VGA compatible chip: NVIDIA Corporation GP107 [GeForce GTX 1050] (rev a1) (prog-if 00 [VGA controller])
System: Gigabyte Technology Co., Ltd GP107 [GeForce GTX 1050]
Features: bus master, rapid devsel, latency 0, IRQ 62
Memory: at f8000000 (32-bit, not prefetchable)
Memory: at c0000000 (64-bit, prefetchable)
Memory: at be000000 (64-bit, prefetchable)
I/O ports: c880 [virtual]
Expansion ROM: f7f80000 [disabled]
Functions: <access denied>
Kernel drivers active: nvidia
Modules present: nouveau, nvidia_drm, nvidia 02:00.1
Audio: NVIDIA Corporation GP107GL High Definition Audio Controller (rev a1)
System: Gigabyte Technology Co., Ltd GP107GL High Definition Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 58
Memory: f9efc000 (32-bit, not prefetchable)
Capabilities: <access denied>
Kernel drivers: snd_hda_intel
Audio: NVIDIA Corporation GK110B [GeForce GTX 780 Ti] (rev a1)
System: ASUSTeK Computer Inc. GK110B [GeForce GTX 780 Ti]
Flags: bus master, fast devsel, latency 0, IRQ 61
Memory: fa000000 (32-bit, not prefetchable)
Capabilities: <access denied>
Kernel drivers: nvidia
Audio: NVIDIA Corporation GK110 HDMI Audio (rev a1)
System: ASUSTeK Computer Inc. GK110 HDMI Audio
Flags: bus master, fast devsel, latency 0, IRQ 57
Memory: d8000000 (64-bit, prefetchable)
Capabilities: <access denied>
Audio: snd_hda_intel
Kernel modules: nouveau, nvidia_drm, nvidia 03:00.1
Audio: snd_hda_intel
Section "Device" Identifier Device1 Driver nvidia VendorName NVIDIA Corporation BoardName GeForce GTX 1050 BusID PCI:2:0:0 EndSection Reboot. This might cause boot issues; keep a backup image handy to restore quickly if needed.
Running the control panel as root? Consider adding this section. The screen identifier is Screen1, device Device1, monitor Monitor1, with a depth of 24. The option uses stereo settings: DFP-1, nvidiaXineramaInfoOrder set to DFP-1, metamodes enabled, and force composition pipelines activated. MultiGPU is disabled, base mosaic off, and HorizSync source is edid. VertRefresh ranges from 55 to 76. The display depth remains at 24. This configuration may be useful to explore further.
I included everything, but it’s still not working. I’m going to swap both GPUs. I have an R9 290X and an RX460 nearby. I’ll check if AMD’s drivers can handle them better. This isn’t a long-term fix since I was thinking about selling those cards, but I’m willing to give it another shot.