F5F Stay Refreshed Software Operating Systems Not found in EFI settings list

Not found in EFI settings list

Not found in EFI settings list

H
hotcone33
Member
204
11-27-2016, 05:27 PM
#1
I attempted several times to upgrade for a win 10, but it didn’t work. Eventually I made a bootable ISO, used Rufus to write it onto a USB stick, and installed the OS on my SSD. While running from the USB, I had to switch the boot mode from UEFI to Legacy. After installation, I tried reverting it back to UEFI, but if the SSD isn’t recognized as a boot device in UEFI, it only works in Legacy mode. The system is functioning properly. Are there any reasons you’d need to switch back to UEFI? Just curious.
H
hotcone33
11-27-2016, 05:27 PM #1

I attempted several times to upgrade for a win 10, but it didn’t work. Eventually I made a bootable ISO, used Rufus to write it onto a USB stick, and installed the OS on my SSD. While running from the USB, I had to switch the boot mode from UEFI to Legacy. After installation, I tried reverting it back to UEFI, but if the SSD isn’t recognized as a boot device in UEFI, it only works in Legacy mode. The system is functioning properly. Are there any reasons you’d need to switch back to UEFI? Just curious.

N
NEB_CJMathyZ
Junior Member
37
11-29-2016, 09:36 AM
#2
It seems you haven't set up Windows in EFI mode. Make sure your BIOS is configured for EFI only. Your USB or disc copy of Windows must also support EFI, which Rufus handles properly. During installation, choose the correct drive and remove everything on it—especially the C drive. Then click New - Apply, and you should see available partitions on your C drive. Pick the largest available primary drive and proceed.
N
NEB_CJMathyZ
11-29-2016, 09:36 AM #2

It seems you haven't set up Windows in EFI mode. Make sure your BIOS is configured for EFI only. Your USB or disc copy of Windows must also support EFI, which Rufus handles properly. During installation, choose the correct drive and remove everything on it—especially the C drive. Then click New - Apply, and you should see available partitions on your C drive. Pick the largest available primary drive and proceed.

S
Sentio_Cege
Member
246
11-29-2016, 02:10 PM
#3
Format the SSD for GPT creation. Activate UEFI settings. Boot using the USB drive. From the SSD, create a fresh partition with the Windows installer. After setup, four partitions will appear.
S
Sentio_Cege
11-29-2016, 02:10 PM #3

Format the SSD for GPT creation. Activate UEFI settings. Boot using the USB drive. From the SSD, create a fresh partition with the Windows installer. After setup, four partitions will appear.

T
ToFastToFight
Junior Member
4
11-29-2016, 02:18 PM
#4
You can verify if your ISO supports EFI by checking the boot options during installation. If you need to switch to EFI, consider it an upgrade from legacy—EFI offers better performance and features, though it may require a compatible BIOS and hardware.
T
ToFastToFight
11-29-2016, 02:18 PM #4

You can verify if your ISO supports EFI by checking the boot options during installation. If you need to switch to EFI, consider it an upgrade from legacy—EFI offers better performance and features, though it may require a compatible BIOS and hardware.

I
IMayBeDead
Senior Member
696
11-30-2016, 09:46 PM
#5
You shouldn't use Rufus if you wish to boot in UEFI mode. Simply format the USB to FAt32 then copy paste everything from the ISO to the USB drive and it will boot in UEFI mode. As for the benefits of UEFI, quite simply a 6 second boot time is all you really need to know, theres other stuff to but the main reason to use UEFI mode to install Windows is for fast boot.
I
IMayBeDead
11-30-2016, 09:46 PM #5

You shouldn't use Rufus if you wish to boot in UEFI mode. Simply format the USB to FAt32 then copy paste everything from the ISO to the USB drive and it will boot in UEFI mode. As for the benefits of UEFI, quite simply a 6 second boot time is all you really need to know, theres other stuff to but the main reason to use UEFI mode to install Windows is for fast boot.

L
Llabros
Senior Member
740
12-06-2016, 06:39 PM
#6
Your board, when all drives are forced to boot in EFI mode, will treat your flash drive as a bootable item in the startup menu. If you've already set up Windows in legacy style, switching to EFI is relatively simple. You'll experience quicker boot times, faster sleep and shutdown, plus quicker wake-up from sleep and other improvements.
L
Llabros
12-06-2016, 06:39 PM #6

Your board, when all drives are forced to boot in EFI mode, will treat your flash drive as a bootable item in the startup menu. If you've already set up Windows in legacy style, switching to EFI is relatively simple. You'll experience quicker boot times, faster sleep and shutdown, plus quicker wake-up from sleep and other improvements.

L
legobuilder300
Junior Member
2
12-07-2016, 02:41 AM
#7
Thanks guys... re-installing Windows 10 should work fine, but getting updates and drivers online will be tricky due to the slow internet. I’ll keep using the old boot method until I need to reformat the system again.
L
legobuilder300
12-07-2016, 02:41 AM #7

Thanks guys... re-installing Windows 10 should work fine, but getting updates and drivers online will be tricky due to the slow internet. I’ll keep using the old boot method until I need to reformat the system again.