F5F Stay Refreshed Hardware Desktop Not connected correctly to ground?

Not connected correctly to ground?

Not connected correctly to ground?

X
xwrongwayx
Junior Member
9
05-30-2016, 06:10 PM
#1
This behavior seems unusual but could be due to residual electrical energy. Touching the screws causes a shock while the device is off and unplugged, but not when powered on. It suggests the case may retain some charge. This doesn't harm your components but might affect safety if left unattended.
X
xwrongwayx
05-30-2016, 06:10 PM #1

This behavior seems unusual but could be due to residual electrical energy. Touching the screws causes a shock while the device is off and unplugged, but not when powered on. It suggests the case may retain some charge. This doesn't harm your components but might affect safety if left unattended.

_
_Altron_
Junior Member
34
05-30-2016, 06:28 PM
#2
The computer is connected to ground using the ground pin on the power cable. Removing that means any stored charge flows through you because you become the route to ground when you make contact with the case.
_
_Altron_
05-30-2016, 06:28 PM #2

The computer is connected to ground using the ground pin on the power cable. Removing that means any stored charge flows through you because you become the route to ground when you make contact with the case.

_
_Shipow_
Member
72
05-30-2016, 08:12 PM
#3
You need to let your PC fully charge before handling it. Keeping it plugged in while charging can be harmful.
_
_Shipow_
05-30-2016, 08:12 PM #3

You need to let your PC fully charge before handling it. Keeping it plugged in while charging can be harmful.

B
BattleHack
Member
156
06-06-2016, 02:12 PM
#4
Connect it directly with the power outlet and switch it off. This makes the power cord act as a grounding connection.
B
BattleHack
06-06-2016, 02:12 PM #4

Connect it directly with the power outlet and switch it off. This makes the power cord act as a grounding connection.

R
r_money123
Junior Member
9
06-07-2016, 09:35 PM
#5
Your computer stops sending shocks about 30 minutes after you power it down. You can leave it connected until then.
R
r_money123
06-07-2016, 09:35 PM #5

Your computer stops sending shocks about 30 minutes after you power it down. You can leave it connected until then.

X
XHi_Im_AshX
Junior Member
4
06-07-2016, 10:34 PM
#6
Power moves swiftly like light, releasing energy immediately.
X
XHi_Im_AshX
06-07-2016, 10:34 PM #6

Power moves swiftly like light, releasing energy immediately.

L
luxrox
Member
227
06-24-2016, 05:37 AM
#7
It seems unusual for you to feel shocked after being turned off. The issue might relate to how your device handles power interruptions or grounding setup.
L
luxrox
06-24-2016, 05:37 AM #7

It seems unusual for you to feel shocked after being turned off. The issue might relate to how your device handles power interruptions or grounding setup.

J
JonoGaimz
Member
63
07-01-2016, 11:18 PM
#8
It doesn't have grounding. For maximum safety, especially with existing shock problems, use a grounded outlet.
J
JonoGaimz
07-01-2016, 11:18 PM #8

It doesn't have grounding. For maximum safety, especially with existing shock problems, use a grounded outlet.