Not available for access.
Not available for access.
Hi everyone, trying to reach the BIOS to configure the XMP profile but it always jumps back to Windows. I've pressed F2/del repeatedly without success. Checked settings/recovery/restart options and UEF firmware settings, but nothing changes. It restarts straight into Windows. I'm using ASUS TUF Pro X570 with MSI Optix Mag341 at 100Hz running Windows 10 Home version 2004. Any suggestions?
Open the control panel and search for "startup" in the settings, then select "change advanced startup options." Click "Restart now" in the advanced startup section. After restarting, you'll see an option to add BIOS information. Proceed to Troubleshoot -> Advanced options -> UEFI Firmware Settings.
Are you sure? This seems unusual. Just disconnect the drives, go into BIOS, adjust RAM settings, and reconnect them. It’s a quick fix compared to searching for a permanent solution. Also turn off Fast Boot in both BIOS and Windows—it improves chances of entering BIOS later. You might also attempt a hard reset by holding power for five seconds before trying again. I believe unplugging the drives is the most effective approach.