Noname boot mode works, but the disk isn't recognized.

alexmendoza
Junior Member

12-24-2016, 10:59 PM

Hello, I'm experiencing a strange problem with starting Windows. When it boots, the message "Reboot and select or insert proper boot device" appears. In the boot menu, my Adata system disk is listed second, but selecting that doesn't work. The first option is missing. Changing the boot order didn't resolve the issue. Any suggestions?

alexmendoza

12-24-2016, 10:59 PM #1

reily1
Member

226

12-26-2016, 10:25 AM

Check if the current setup is a fresh installation or if an older Windows version was present on any of the storage devices.

reily1

12-26-2016, 10:25 AM #2

Check if the current setup is a fresh installation or if an older Windows version was present on any of the storage devices.

Slylus7
Member

12-26-2016, 10:55 AM

Only the disk where Windows was previously installed is Adata; it isn't a fresh setup. I'm running on a new drive for about a week, but it's working fine so far.

Slylus7

12-26-2016, 10:55 AM #3

Only the disk where Windows was previously installed is Adata; it isn't a fresh setup. I'm running on a new drive for about a week, but it's working fine so far.

zNoouz_
Senior Member

259

12-27-2016, 01:03 PM

Confirming the issue isn't related to ADATA SU630. Disconnecting all other drives, leaving only the Windows drive connected, what will occur?

zNoouz_

12-27-2016, 01:03 PM #4

Confirming the issue isn't related to ADATA SU630. Disconnecting all other drives, leaving only the Windows drive connected, what will occur?

Kylixe
Junior Member

01-18-2017, 05:31 AM

I attempted it with just this option and it returned the same result.

Kylixe

01-18-2017, 05:31 AM #5

I attempted it with just this option and it returned the same result.

jleff59
Junior Member

01-24-2017, 01:20 PM

No alterations were made to your partitions or drives prior to this issue. Please share the actions you performed if you remember them.

jleff59

01-24-2017, 01:20 PM #6

No alterations were made to your partitions or drives prior to this issue. Please share the actions you performed if you remember them.

Pimousse62620
Member

234

01-26-2017, 01:58 PM

I powered off and then restarted. This setup works now. I tried sleep mode once before using this device.

Pimousse62620

01-26-2017, 01:58 PM #7

I powered off and then restarted. This setup works now. I tried sleep mode once before using this device.

ChibiWolf39
Senior Member

491

02-16-2017, 09:53 PM

I adjusted the settings and turned off the CSM support, and it started working fine now. I'm not sure what caused the change, but it seems to be functioning correctly.

ChibiWolf39

02-16-2017, 09:53 PM #8

I adjusted the settings and turned off the CSM support, and it started working fine now. I'm not sure what caused the change, but it seems to be functioning correctly.