Noise pattern involving recurring electrical vibrations
Noise pattern involving recurring electrical vibrations
Hey there - just finished a build and noticed a repeating buzzing sound. In about six seconds it switches from silence to a clear hum and back again. It's quite unusual. I changed all the parts, reset everything, and even unplugged/reconnected it. Still puzzled, so I reached out for advice. The machine is running smoothly with no other issues. I can now play Shadows of Mordor in 4K Ultra at 60Hz and it works great. Thanks a lot for your help! See the details below – listed on my profile and PCPP. https://pcpartpicker.com/list/2GTYfv CPU i5-11600K @ 3.90GHZ Motherboard Gigabyte Z590 UD AC - Bios American Megatrends International, LLC. Version F5, 23-AUG-21 RAM Patriot 16x2 @ 3600MT/s GPU NVIDIA GeForce RTX 3060Ti Case Corsair iCUE 220T RGB Storage Samsung SSD 850 EVO 250GB [Boot Drive], MSI M390 1TB [Game Storage], ST100DM003-1CH162 [Photos], ST3100052AS [Work] PSU Corsair Builder Series CX 600 Watt ATX/EPS 80 PLUS (CX600) Display(s) Dell S2721QS Cooling Deepcool GAMMAXX GT A-RGB 120mm Hydro Bearing Operating System Windows 10
Coil whine is a high-pitched sound often heard in motors or electronics.
I left the machine running for half an hour and noticed the humming when I returned. I captured a short clip of one of the cycles. At first it was just the fan's sound, then the buzzing grew louder before fading back down and repeating.
I think I might have heard that before, but it doesn’t match the whine I’m used to. It could be related to the hard drive, though I’m not sure.
Hey everyone - I figured out my issue and thought you might want to know. I found that touching the tempered glass panel helped reduce the noise, and then I noticed I could tighten the screws even more than before. This should quiet things down. Short version: tighten those screws and it should work. As for why it was a buzzing rather than steady, I don’t have any idea.