F5F Stay Refreshed Hardware Desktop Noise coming from the computer is unusual.

Noise coming from the computer is unusual.

Noise coming from the computer is unusual.

Pages (2): 1 2 Next
K
Kuji
Member
133
01-02-2021, 10:30 AM
#1
It occurred once when I turned on RT in The First Descendant and now it happens while loading shaders in BF 2042. Probably due to my GPU. System specs: CPU - Ryzen 7 9800X3D, GPU - RTX 5070, Pallet Infinity 3, MOBO - ASRock PHANTOM GAMING X870, RIPTIDE Wi-Fi, RAM - Kingston FURY Beast 32GB DDR5 6000MHz, CPU Cooler - Deepcool PN750M, 80+ Gold, 750W. Updated 20250726_213140.mp4
K
Kuji
01-02-2021, 10:30 AM #1

It occurred once when I turned on RT in The First Descendant and now it happens while loading shaders in BF 2042. Probably due to my GPU. System specs: CPU - Ryzen 7 9800X3D, GPU - RTX 5070, Pallet Infinity 3, MOBO - ASRock PHANTOM GAMING X870, RIPTIDE Wi-Fi, RAM - Kingston FURY Beast 32GB DDR5 6000MHz, CPU Cooler - Deepcool PN750M, 80+ Gold, 750W. Updated 20250726_213140.mp4

A
axxerr77
Member
120
01-02-2021, 11:21 AM
#2
Implies an obstruction in the path of rotating fan blades.
A
axxerr77
01-02-2021, 11:21 AM #2

Implies an obstruction in the path of rotating fan blades.

H
Hydroforce33
Senior Member
550
01-05-2021, 09:42 PM
#3
It seems the issue isn't resolved. I examined all the case fans and used MSI Kombustor to increase GPU fan speeds. The problem appears only during shader loading in BF 2042, where GPU usage drops to 5-7%. It doesn’t occur while playing.
H
Hydroforce33
01-05-2021, 09:42 PM #3

It seems the issue isn't resolved. I examined all the case fans and used MSI Kombustor to increase GPU fan speeds. The problem appears only during shader loading in BF 2042, where GPU usage drops to 5-7%. It doesn’t occur while playing.

U
Username_46
Junior Member
13
01-05-2021, 10:50 PM
#4
The noise level might stay similar, but pushing fans to 100% can increase heat and potentially cause more stress on components.
U
Username_46
01-05-2021, 10:50 PM #4

The noise level might stay similar, but pushing fans to 100% can increase heat and potentially cause more stress on components.

T
Trentqn
Member
150
01-06-2021, 06:19 AM
#5
It was actually a GPU fan. When I increased the fans manually in MSI Afterburner, it began making noise. My setup had an Anti-sag support with foam on it. Should I take out the foam and use it as is, or remove it completely? I’m not sure if it’s necessary for this small card. Any advice would be appreciated. Thanks!
T
Trentqn
01-06-2021, 06:19 AM #5

It was actually a GPU fan. When I increased the fans manually in MSI Afterburner, it began making noise. My setup had an Anti-sag support with foam on it. Should I take out the foam and use it as is, or remove it completely? I’m not sure if it’s necessary for this small card. Any advice would be appreciated. Thanks!

O
oMabye
Member
201
01-06-2021, 07:31 AM
#6
When the foam is scraping against the fan, a precise Exacto knife can help eliminate it from the affected area.
O
oMabye
01-06-2021, 07:31 AM #6

When the foam is scraping against the fan, a precise Exacto knife can help eliminate it from the affected area.

V
vwgti2a
Member
106
01-06-2021, 02:05 PM
#7
I saw there are some screws for moving it, which helps prevent contact with the fan blades. Everything looks fine.
V
vwgti2a
01-06-2021, 02:05 PM #7

I saw there are some screws for moving it, which helps prevent contact with the fan blades. Everything looks fine.

C
Cooning69
Junior Member
2
01-08-2021, 03:16 AM
#8
Aha! Consider removing the end foam carefully so it doesn’t contact the fan, keeping some for the card’s end. The foam helps dampen vibrations, so take care not to take everything off near the GPU’s end.
C
Cooning69
01-08-2021, 03:16 AM #8

Aha! Consider removing the end foam carefully so it doesn’t contact the fan, keeping some for the card’s end. The foam helps dampen vibrations, so take care not to take everything off near the GPU’s end.

H
Heyzer
Member
208
01-08-2021, 11:14 AM
#9
The support has three positions (highlighted in green). It was initially on the first spot. I shifted it to the second, and now it’s placed correctly.
H
Heyzer
01-08-2021, 11:14 AM #9

The support has three positions (highlighted in green). It was initially on the first spot. I shifted it to the second, and now it’s placed correctly.

J
Jumx41
Member
167
01-17-2021, 07:11 AM
#10
That's awesome! Your setup looks solid—your 9800X3D and 4080 combo is powerful. Let me know what case you're using so I can help you compare it later.
J
Jumx41
01-17-2021, 07:11 AM #10

That's awesome! Your setup looks solid—your 9800X3D and 4080 combo is powerful. Let me know what case you're using so I can help you compare it later.

Pages (2): 1 2 Next