No, your Gigabyte Aero OC 4080 Super isn't defective. It's a standard product with typical performance and reliability.
No, your Gigabyte Aero OC 4080 Super isn't defective. It's a standard product with typical performance and reliability.
I understand this idea as a suggestion but it doesn't apply here and contains inaccuracies. In certain situations, single cables or adapters may not handle the full power demand that multiple ones can manage. This is why many manufacturers advise using separate cables instead of just one. Additionally, you might not be aware of recent developments; there have been significant issues with those 12V power connectors, like them overheating completely. They were reportedly resolved recently, but single cables still may not meet the ATX 3.0 standards in some cases. That's why motherboard makers often recommend using multiple cables. This should help clarify the situation.
Using DDU didn't fix the problem. I'm treating this 4080 as faulty until it arrives. If I can't use the adapter, I'll switch to the 4070ti or go for a 7900xtx now.
I understand the melting connector problem well. Since you need to connect a 12Vhpwr cable to the GPU—whether using an adapter or not—the issue of overheating cables remains unclear when choosing between options. Regarding insufficient power delivery for 12Vhpwr cables, there isn’t much recent information available; the video you referenced is over a year old and may not reflect current standards.
In fact, you weren't fully informed. If you understood the situation, you wouldn't keep debating these points. The problem isn't just about adapters—it's about the connectors themselves. Evidence consistently shows that a single point of failure is problematic for these GPUs. Many users still don’t grasp this, even though they claim otherwise. It’s not enough to rely on adapters; the connectors themselves need attention. You seem unsure why you haven't explored the topic further, despite having seen videos and articles about it. Why aren't you considering simpler solutions like separate cables? Researching basic information would help. Don’t dismiss these concerns as outdated or irrelevant—your repeated arguments suggest otherwise. This isn’t just a matter of preference; safety matters. Please recognize this and adjust your stance accordingly.
I believe there was a misinterpretation of what I intended to convey. Before proceeding further, let's clarify: As previously mentioned, I wasn't suggesting that "12vhwpr is superior to 6+2 pin." What I expressed was: "One 12vhpwr cable is preferable to multiple 6+2 pins plus an adapter." Or more simply: "For powering your 4080, you can either use a single 12vhpwr cable directly from the PSU to the GPU, or use the provided adapter with several 6+2 pins connected. In both cases, the GPU will rely on the 12vhpwr connector. This means both setups have limitations, but keeping the cable count low is clearly advantageous."
Additionally, the concern raised in my previous message was about 12vhpwr cables struggling to deliver sufficient power. I wasn't referring to the connectors themselves, only the cables used for them. This relates to incidents where the cables (specifically labeled A) have experienced melting, suggesting safety issues. If you're aware of any such cases involving cable A on the PSU side, please share.
Regarding the 12vhwpr connector problems on the PSU side, I've only heard about one reported incident. If this is more common than understood, let me know.
Lastly, I encourage reviewing our discussion carefully and understanding my points within context. Please maintain a respectful tone; otherwise, I'll stop engaging further. I'm open to having my views challenged constructively. If you continue to treat my input dismissively, I won't respond again. I value the chance to be heard.