No, this model does not support the Ryzen 5 2600.
No, this model does not support the Ryzen 5 2600.
I bought a brand new Ryzen 5 2600 and it doesn’t let my PC connect. I have a graphics card and an MSI Aero ITX RX560 that works well with my old AMD chip. I’ve heard updates to the BIOS firmware can help, but I’m using the latest version for my A12 and it seems newer A-Series chips aren’t compatible. I’m unsure why the BIOS won’t let me change settings or access the UEFI. No issues with the processor pins. What could be causing this?
Install the old CPU into its socket. Verify you have BIOS version F20 or higher, such as F25. As the guide indicates, F25 is the most recent version compatible with your CPU. Reset the BIOS settings... place the jumper, disconnect the power cable, wait more than 10 seconds, then reinsert the jumper. Wait in the startup PC for 1-2 minutes with a black screen or similar until recognition is complete. Sometimes this requires several reboots. Remember that the 2600 model lacks integrated graphics, so the motherboard video outputs won<|pad|> should not function with a new CPU. You’ll need to install a real video card in a PCI-E slot if you used the built-in one before. After the CPU starts working, you can upgrade BIOS gradually, one at a time, following the instructions carefully. Some BIOS versions must be programmed first, as they modify microcode inside the CPU, and later updates depend on that microcode being present.
I'm connected to the A12-9800 APU. Instructed the motherboard to utilize the hidden card as well. Gigabyte confirms F21 and higher models support Ryzen 5 2600 2nd gen.
Good luck with that board. It had several issues for a while—extremely slow post times, RAM problems, SATA detection errors. Even after updating the BIOS, those problems persisted. I switched to another board with the same CPU, and everything worked perfectly afterward.