F5F Stay Refreshed Hardware Desktop No, the power supply unit is still operational.

No, the power supply unit is still operational.

No, the power supply unit is still operational.

Pages (2): 1 2 Next
D
DiamndQueen
Member
210
11-30-2016, 06:15 AM
#1
Hey everyone! I've been adjusting a SFF Acer Verizon and it was running smoothly until recently. Now, when I tried to start it, nothing happened. The CPU fan whirs once, the power indicator lights up, the drive light also comes on, but then the system powers off immediately. This is unusual for me—I haven’t seen anything like this before. Could this mean the power supply unit has failed? Any advice or tips would be greatly appreciated!
D
DiamndQueen
11-30-2016, 06:15 AM #1

Hey everyone! I've been adjusting a SFF Acer Verizon and it was running smoothly until recently. Now, when I tried to start it, nothing happened. The CPU fan whirs once, the power indicator lights up, the drive light also comes on, but then the system powers off immediately. This is unusual for me—I haven’t seen anything like this before. Could this mean the power supply unit has failed? Any advice or tips would be greatly appreciated!

M
mian_yang
Junior Member
42
11-30-2016, 07:16 AM
#2
You're asking about the meaning behind someone's comment about working on a power supply unit. It seems they're pointing out that modifying a PSU is considered inappropriate in these discussions.
M
mian_yang
11-30-2016, 07:16 AM #2

You're asking about the meaning behind someone's comment about working on a power supply unit. It seems they're pointing out that modifying a PSU is considered inappropriate in these discussions.

T
TRN_PigyGirl
Junior Member
10
12-06-2016, 07:46 AM
#3
I refreshed the thermal paste, cleared out some dust, updated the BIOS, reinstalled the windows, and added a SATA Y splitter power cable so an extra drive could be connected (as recommended in another thread here). I didn’t open the PSU, and everything was working fine the last time.
T
TRN_PigyGirl
12-06-2016, 07:46 AM #3

I refreshed the thermal paste, cleared out some dust, updated the BIOS, reinstalled the windows, and added a SATA Y splitter power cable so an extra drive could be connected (as recommended in another thread here). I didn’t open the PSU, and everything was working fine the last time.

W
Wolfpack4
Junior Member
11
12-17-2016, 05:43 AM
#4
I believe I misunderstood your initial message. A Y-splitter isn't suitable for SATA connections because the standard protocol supports only one drive per wire. It's unclear how this is being handled here. This issue seems tough to troubleshoot. Your device appears to be powering on and the fan is running, so we can't immediately identify the PSU. Have you attempted removing your memory modules one by one to test? Are there any diagnostic LEDs on your motherboard that might provide clues?
W
Wolfpack4
12-17-2016, 05:43 AM #4

I believe I misunderstood your initial message. A Y-splitter isn't suitable for SATA connections because the standard protocol supports only one drive per wire. It's unclear how this is being handled here. This issue seems tough to troubleshoot. Your device appears to be powering on and the fan is running, so we can't immediately identify the PSU. Have you attempted removing your memory modules one by one to test? Are there any diagnostic LEDs on your motherboard that might provide clues?

Z
zLeoZiin
Senior Member
503
12-18-2016, 09:10 PM
#5
Inspect every plug, reposition GPU and RAM. It seems you made a mistake that might be fixed easily. After setting up Windows?
Z
zLeoZiin
12-18-2016, 09:10 PM #5

Inspect every plug, reposition GPU and RAM. It seems you made a mistake that might be fixed easily. After setting up Windows?

C
CoolboyGR
Member
201
12-18-2016, 10:56 PM
#6
I only have a small beeper that doesn’t ring much, so it’s not very useful. I’ve done everything possible, removed all unnecessary parts, but it still won’t power on. This machine relies solely on the iGPU from the Intel Core i3-4130 chip. In the worst case, the motherboard might fail. I installed the drivers, updated the BIOS, restarted a few times, and watched YouTube videos to check for smooth operation.
C
CoolboyGR
12-18-2016, 10:56 PM #6

I only have a small beeper that doesn’t ring much, so it’s not very useful. I’ve done everything possible, removed all unnecessary parts, but it still won’t power on. This machine relies solely on the iGPU from the Intel Core i3-4130 chip. In the worst case, the motherboard might fail. I installed the drivers, updated the BIOS, restarted a few times, and watched YouTube videos to check for smooth operation.

O
oOEmmaOo
Posting Freak
818
12-19-2016, 04:48 AM
#7
It might work without that Y splitter. Are you checking your stock levels? Or did you attempt to reset the BIOS? Edited September 14, 2023 by leclod
O
oOEmmaOo
12-19-2016, 04:48 AM #7

It might work without that Y splitter. Are you checking your stock levels? Or did you attempt to reset the BIOS? Edited September 14, 2023 by leclod

B
brobear7
Posting Freak
892
12-20-2016, 07:52 AM
#8
Yeah it's disconnected. Even with just RAM and CPU connected the PC doesn't stay on long enough to go to BIOS. I'm using stock settings yeah Oh and a strange thing that happens is whenever I remove the power plug and then plug it back in, the fan spins for a second (just like when I press the power button)
B
brobear7
12-20-2016, 07:52 AM #8

Yeah it's disconnected. Even with just RAM and CPU connected the PC doesn't stay on long enough to go to BIOS. I'm using stock settings yeah Oh and a strange thing that happens is whenever I remove the power plug and then plug it back in, the fan spins for a second (just like when I press the power button)

D
146
12-21-2016, 09:54 AM
#9
Sorry I overlooked the part about it working perfectly until a few days ago. You might have damaged the CPU instead of the motherboard, perhaps due to overheating? It would be helpful to test things on different systems. Edited September 14, 2023 by leclod
D
D14M0ND_D34THS
12-21-2016, 09:54 AM #9

Sorry I overlooked the part about it working perfectly until a few days ago. You might have damaged the CPU instead of the motherboard, perhaps due to overheating? It would be helpful to test things on different systems. Edited September 14, 2023 by leclod

L
LoL_e_melhor
Member
96
12-22-2016, 11:33 AM
#10
I've placed an order for a PSU to check if that resolves the issue. If it doesn't work, I'll move on to testing the CPU. If neither helps, we'll proceed further.
L
LoL_e_melhor
12-22-2016, 11:33 AM #10

I've placed an order for a PSU to check if that resolves the issue. If it doesn't work, I'll move on to testing the CPU. If neither helps, we'll proceed further.

Pages (2): 1 2 Next