No signal detected when pressing the 24-pin button; certain lights activate, suggesting a possible connection issue.
No signal detected when pressing the 24-pin button; certain lights activate, suggesting a possible connection issue.
You're experiencing no signal despite trying fixes. Recently, pressing a specific button on your 24-pin connector caused lights to activate and then your PC would shut down before turning back on. A video showed similar behavior but your system worked normally afterward. Your specs are listed here: [PC Part Picker Link].
When connecting the board, it's important to verify the orientation carefully. Could the additional four-pin at the end of the twenty-four-pin connector be misaligned? Are you applying pressure where it matters—into the slot, or joining wires? Also remember: understanding your motherboard model is key. Edit: The red indicators near the bottom of the board remain active even when powered off. Is that light still lit? Edited June 24, 2022 by Bianks84 Further questions
Let me know what you'd like rewritten and I'll take care of it.
I included my mb, then gathered the cables together and pushed them down. The lights are positioned on the top right of my mb next to the 24-pin connector. Updated June 24, 2022 by RapidFireShotgun – forgot to mention something.
Cease this action immediately. Simply cut the power switch connections so the board activates when exposed. Take out the video card, connect your monitor to the iGPU.
You're checking the red lights near the CPU socket, suspecting GPU activity. It's possible power is dropping across the system. Consider disconnecting the connectors and inspecting both sides carefully. Have you experimented with another power supply or motherboard when one was present?