No post found for Ryzen 3600 alongside Rog B450-F.
No post found for Ryzen 3600 alongside Rog B450-F.
Video link shows Mobo cycling through all QLED screens, then nothing else occurs. All fans are connected to the motherboard and GPU, only M.2 and HDMI reach a monitor. The system runs with Ryzen 5 3600, Asus Rog Strix B450-F, Energon EPS-650W, Gigabyte Gtx1060, 6GB/8GB DDR4 at 3200MHz (two in box). Specs say it's a 3000 series unit, and the retailer confirmed no BIOS update needed.
The connector is placed on the board, not the GPU. There isn’t a speaker near the frame, which could be why you’re not hearing beeps. For clarity, here are some images of the full board layout.
Ensure the monitor is connected to the GPU, not the motherboard. Output may take a moment to appear.
Reset the CMOS, link the GPU power and HDMI cable to the GPU. The 3600 doesn’t support video output. This could be because the video setting is left on the motherboard by default instead of being enabled automatically.