F5F Stay Refreshed Hardware Desktop No post :(

No post :(

No post :(

S
swagie_assasin
Junior Member
30
11-23-2016, 09:40 PM
#1
Hi, I’m working on fixing an old server with an ASRock IMB151D. When it starts up, the CPU fan runs for about 30 seconds, then makes a short beep before shutting off and restarting. After replacing the RAM sticks twice with working ones, I removed the CMOS battery and power cable, held the power button, and still faced issues. It seems there might be a problem with the board itself. Any advice or suggestions would be really helpful.
S
swagie_assasin
11-23-2016, 09:40 PM #1

Hi, I’m working on fixing an old server with an ASRock IMB151D. When it starts up, the CPU fan runs for about 30 seconds, then makes a short beep before shutting off and restarting. After replacing the RAM sticks twice with working ones, I removed the CMOS battery and power cable, held the power button, and still faced issues. It seems there might be a problem with the board itself. Any advice or suggestions would be really helpful.

J
JaminF
Junior Member
44
12-10-2016, 07:58 AM
#2
The system has additional specifications you can ask about.
J
JaminF
12-10-2016, 07:58 AM #2

The system has additional specifications you can ask about.

0
05matthew05
Member
62
12-11-2016, 12:01 PM
#3
Based on what I understand, it features an Intel J1900 processor, DDR 3 RAM, multiple memory modules, and a 500GB hard drive. This page provides details about the board and CPU, indicating they are designed for advanced users rather than general consumers. It may not be readily available anymore. https://www.asrockind.com/en-gb/IMB-151D
0
05matthew05
12-11-2016, 12:01 PM #3

Based on what I understand, it features an Intel J1900 processor, DDR 3 RAM, multiple memory modules, and a 500GB hard drive. This page provides details about the board and CPU, indicating they are designed for advanced users rather than general consumers. It may not be readily available anymore. https://www.asrockind.com/en-gb/IMB-151D

R
Raze_FR
Member
200
12-11-2016, 01:09 PM
#4
Have you tackled each step one at a time in A1? Which ones have you tested, especially if they’re OEM memory, they might not boot due to mismatched expectations.
R
Raze_FR
12-11-2016, 01:09 PM #4

Have you tackled each step one at a time in A1? Which ones have you tested, especially if they’re OEM memory, they might not boot due to mismatched expectations.

B
Bubzkittys
Member
50
12-12-2016, 12:17 AM
#5
It only had one stick in at a time, unsure which slot was A1. I’ve tested it in both of them. The other RAMs I’ve used are from two old Dell laptops—one Samsung M471B5273EB0-CKO and another Dell model (cn-0v1rx3-70166-223-04mv).
B
Bubzkittys
12-12-2016, 12:17 AM #5

It only had one stick in at a time, unsure which slot was A1. I’ve tested it in both of them. The other RAMs I’ve used are from two old Dell laptops—one Samsung M471B5273EB0-CKO and another Dell model (cn-0v1rx3-70166-223-04mv).