F5F Stay Refreshed Hardware Desktop No output, no response, fans are running, GPU activated

No output, no response, fans are running, GPU activated

No output, no response, fans are running, GPU activated

O
One_L_Wil
Member
175
10-13-2022, 12:45 PM
#1
When powering up the system, no beep occurs for the post, yet the GPU connector light changes color, fans spin, but no signal reaches the monitor. Power supply unit is Corsair CX650m, CPU is Ryzen 3 3100, motherboard B450M-A Pro Max, GPU is XFX AMD Raiden RX 5500 XT, RAM is 1x16GB DDR4 2666MHz, SSD is Crucial P310 1TB (no OS installed).

Actions taken: Reconnected all connectors, RAM, CPU. Switched cables and monitors. Removed RAM stick to check speaker diagnostics – they worked. Tested a functional graphics card (R9 Nano) in this setup – same issue. Disconnected all peripherals. Removed CMOS battery for 30 minutes, then reinserted. Started PC with a bootable USB. Tried booting without the SSD. No further solutions identified.

Consider testing the GPU on another desktop or checking compatibility manually.
O
One_L_Wil
10-13-2022, 12:45 PM #1

When powering up the system, no beep occurs for the post, yet the GPU connector light changes color, fans spin, but no signal reaches the monitor. Power supply unit is Corsair CX650m, CPU is Ryzen 3 3100, motherboard B450M-A Pro Max, GPU is XFX AMD Raiden RX 5500 XT, RAM is 1x16GB DDR4 2666MHz, SSD is Crucial P310 1TB (no OS installed).

Actions taken: Reconnected all connectors, RAM, CPU. Switched cables and monitors. Removed RAM stick to check speaker diagnostics – they worked. Tested a functional graphics card (R9 Nano) in this setup – same issue. Disconnected all peripherals. Removed CMOS battery for 30 minutes, then reinserted. Started PC with a bootable USB. Tried booting without the SSD. No further solutions identified.

Consider testing the GPU on another desktop or checking compatibility manually.

K
karlerik_1999
Member
205
10-13-2022, 01:54 PM
#2
Was das neue System noch einmal funktioniert? Hat es je zuvor funktioniert? Ohne Ram gibt es einen Piepton, mit ihm nicht. Wenn ja, probiere einen anderen Stab aus. Bearbeitet am 12.01 von leclod
K
karlerik_1999
10-13-2022, 01:54 PM #2

Was das neue System noch einmal funktioniert? Hat es je zuvor funktioniert? Ohne Ram gibt es einen Piepton, mit ihm nicht. Wenn ja, probiere einen anderen Stab aus. Bearbeitet am 12.01 von leclod

C
CJP8602
Member
55
10-15-2022, 02:09 PM
#3
Most components are familiar, though a few are brand new such as the graphics card and SSD. When the RAM stick is removed, three long beeps appear suggesting a RAM problem due to improper insertion. Inserting it again doesn’t trigger that sound, but I don’t hear any post-beep notification either.
C
CJP8602
10-15-2022, 02:09 PM #3

Most components are familiar, though a few are brand new such as the graphics card and SSD. When the RAM stick is removed, three long beeps appear suggesting a RAM problem due to improper insertion. Inserting it again doesn’t trigger that sound, but I don’t hear any post-beep notification either.

M
MeGustaElSexo
Member
173
10-15-2022, 04:41 PM
#4
You've experimented with various options? Another set of RAM sticks might work well, someone could help you without interrupting their own device.
M
MeGustaElSexo
10-15-2022, 04:41 PM #4

You've experimented with various options? Another set of RAM sticks might work well, someone could help you without interrupting their own device.

N
Noah_Elias
Junior Member
31
10-22-2022, 04:40 PM
#5
I used the alternative slot, there was no RAM alert sound but still no post sound, I haven’t switched to another RAM stick yet since there were no alerts.
N
Noah_Elias
10-22-2022, 04:40 PM #5

I used the alternative slot, there was no RAM alert sound but still no post sound, I haven’t switched to another RAM stick yet since there were no alerts.

O
OwenBlockATG
Member
67
10-29-2022, 11:51 PM
#6
I don't know if the rx5500XT behaves differently but I own an rx6600XT and the light above the connector lights up when there is no power in the PCI-e cable (or no cable connected). May be you should double-check if that cable carries power correctly. Or you can check in the manual to see if they explain the meaning of the led being lit. Good luck !
O
OwenBlockATG
10-29-2022, 11:51 PM #6

I don't know if the rx5500XT behaves differently but I own an rx6600XT and the light above the connector lights up when there is no power in the PCI-e cable (or no cable connected). May be you should double-check if that cable carries power correctly. Or you can check in the manual to see if they explain the meaning of the led being lit. Good luck !

C
clix800
Member
122
10-30-2022, 09:20 PM
#7
I don't have a detailed guide for this card, but from another forum someone said the blue LED indicates proper power supply. When you remove the connector and the LED turns red, it suggests the device isn't getting power correctly.
C
clix800
10-30-2022, 09:20 PM #7

I don't have a detailed guide for this card, but from another forum someone said the blue LED indicates proper power supply. When you remove the connector and the LED turns red, it suggests the device isn't getting power correctly.

M
Maverick160
Junior Member
6
10-30-2022, 10:09 PM
#8
This setup also signals red when it lacks power. The main change is the absence of a blue light to show power status. I double-checked your parts list and noticed you have a Ryzen 3 3100. You should likely locate a replacement at a used repair shop for a reasonable cost. This would be a simple solution if the price fits. In the worst scenario, you might find an AM4 spare CPU. The next step in troubleshooting is probably testing each component individually on another machine to spot any faults. If all tests succeed, the issue is likely with the motherboard. Have a great day!
M
Maverick160
10-30-2022, 10:09 PM #8

This setup also signals red when it lacks power. The main change is the absence of a blue light to show power status. I double-checked your parts list and noticed you have a Ryzen 3 3100. You should likely locate a replacement at a used repair shop for a reasonable cost. This would be a simple solution if the price fits. In the worst scenario, you might find an AM4 spare CPU. The next step in troubleshooting is probably testing each component individually on another machine to spot any faults. If all tests succeed, the issue is likely with the motherboard. Have a great day!