No output from my new computer.
No output from my new computer.
You just completed assembling your first PC using a blend of new and older components. Everything seems to be working well until the initial boot. The system powers on normally, all peripherals activate, but the monitors remain in standby mode without recognizing the PC or displaying BIOS information. You've attempted several fixes—updating the motherboard BIOS, resetting the CMOS battery, and swapping the GPU into a different PCIe slot. What further steps should you take to resolve this issue?
1. HMDI/DP is linked to the GPU rather than the motherboard?
2. Is the monitor's display source set to Auto? If not, manually choose the appropriate cable type (e.g., HDMI)?
3. Is the GPU correctly positioned?
4. Are the GPU's PCIe power cables firmly attached on both sides?
They connect to my GPU. The monitor buttons aren't functioning properly, but since the devices are quite old, I'm unsure if that's a viable fix. I've reattached it several times—about three to four times—and double-checked the connections before plugging it back in.
Without altering the source format, the screens can't detect the signal. I've personally encountered this issue. Do your monitors support multiple connections like HDMI, VGA, and DVI? Consider connecting your PC to a television if available.
If everything glowed yet there was no screen, it could mean a dead GPU or motherboard. It’s hard to tell without swapping components, so I’d take it to a repair shop and borrow their parts. If the motherboard failed, it wouldn’t work at all, but power might still flow through it. If the GPU is gone, it might still post but not show anything. I’d start with the GPU since it’s likely older.
Just wanted to let you know I finally got a new motherboard installed and it’s all working perfectly. The old one was only supplying power, so that was enough.